It's been forever since I added the excellent Poseidon board to my MkIII's...
I've been running upgrade original style can caps on both my blocks...until recently, one of the sections went pop! So I want to replace these with the SDS Labs cap board...and still use the tube rectification (I think).
For me, the SDS instructions leave a bit to be desired...
For example, the B+ tranny wiring...is the red wire? The center tap is the black wire from the transformer?
The cathode on rec tube...pin 8 I'm assuming?
The two wires to the choke are pretty obvious...
Now, the two connections labelled pin 6 and 5 obviously go to the Poseidon...without having the amps in front of me, are the Poseidon boards labelled the same way...? Pins 5 and 6?
TIA