RCA Passive Phono for the PAS

barter, sell, and trade here first

RCA Passive Phono for the PAS

Postby Geek » Fri Jun 10, 2016 1:18 am

Hi Folks,

Got a new offering and as per usual, going to offer an introductory exclusive for the DIY Tube crowd :))

The RCA phono preamplifier in the RCA Receiving Tube Manual got a 21st century upgrade, including a line driver.

Attached is the board I made (awaiting tubes for a listen :$ Parts and sockets not included ), a parts list and schema. No docs yet.

To use the board with a a PAS2/3, use a 10K dropper for the phono PSU instead of the stock 39K and use heater-balancing techniques (will post later)

Regular: $27.50 USD

DIY Tube Introductory: $25 USD!

Cheers!
Attachments
RCA_Phono_Stage_Part_Numbering.png
RCA_Phono_Stage_Part_Numbering.png (10.9 KiB) Viewed 3844 times
Parts_List.pdf
(48.32 KiB) Downloaded 331 times
RCA_Phono.jpg
RCA_Phono.jpg (86.41 KiB) Viewed 3844 times
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: RCA Passive Phono for the PAS

Postby jukingeo » Tue Mar 23, 2021 7:13 am

Hello,

Did this project come to light? I only see the one introductory post. I am curious to the sonic quality of this design as I have a PAS pre-amp.
Exit Light, Enter Night, Take My Hand...We're off to Never Never Land.
jukingeo
 
Posts: 226
Joined: Wed Jan 21, 2009 11:45 am


Return to preBay

Who is online

Users browsing this forum: No registered users and 0 guests