Screen grid resistors on MKIII

for Dynaco Mark II/III/IV and DIY PP monoblocks

Screen grid resistors on MKIII

Postby jbesound » Tue Mar 29, 2016 12:25 am

Was thinking of adding 100 ohm screen grid resistors to my MKIII clone with 1650n opt's. Any thoughts would be appreciated.
Posts: 4
Joined: Wed Mar 16, 2016 9:23 pm

Re: Screen grid resistors on MKIII

Postby Geek » Tue Mar 29, 2016 1:26 pm

Gm of the screen is really low, so the resistor isn't too critical. I've personally used anything from 100 to 470 in there with success.

-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Return to poseidon

Who is online

Users browsing this forum: No registered users and 21 guests