My New Eiclone KT120 Project Chassis !

a DIY, modified Mullard 5-20 monoblock design

My New Eiclone KT120 Project Chassis !

Postby IGGY » Sun Sep 22, 2013 7:07 pm

Hello All ;)

My new eiclone KT120 dual mono 92 watts x 2 is almost there, please stay tune. Thanks Shannon (y)

Best Regards,
Iggy
Attachments
DSCN3973-1.JPG
DSCN3973-1.JPG (108.41 KiB) Viewed 10107 times
DSCN3976-1.JPG
DSCN3976-1.JPG (104.37 KiB) Viewed 10107 times
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm

Re: My New Eiclone KT120 Project Chassis !

Postby Geek » Mon Sep 23, 2013 12:37 am

Nice chassis work!

Anodized brushed aluminium?
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: My New Eiclone KT120 Project Chassis !

Postby IGGY » Mon Sep 23, 2013 6:38 pm

Thanks Geek ;)

Yes! it is anodized. I hope will be finish soon.

Best Regards,
Iggy
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm

Re: My New Eiclone KT120 Project Chassis !

Postby Shannon Parks » Tue Sep 24, 2013 7:04 am

Iggy,

Do you do your own anodizing? Looks great! (y)

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3764
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: My New Eiclone KT120 Project Chassis !

Postby IGGY » Tue Sep 24, 2013 7:43 pm

(lol) Hello Shannon,

Glad to here from you Shannon. I order the chassis from china and asked the guy to do it for me (two chassis) believe it or not is cost me only $8 (usa).

Best Regards,
Iggy
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm

Re: My New Eiclone KT120 Project Chassis !

Postby highflyin9 » Thu Sep 26, 2013 9:14 am

That's pretty crazy, only $8? I would have guessed $300+ a pop with all those custom holes.
My DIY Electronics Blog: DIYAudioBlog.com
User avatar
highflyin9
 
Posts: 119
Joined: Tue Jul 27, 2010 7:42 pm
Location: East Coast

Re: My New Eiclone KT120 Project Chassis !

Postby IGGY » Thu Sep 26, 2013 6:38 pm

(stop)

Nope ! $8 is only anodized. The front plate and back plate hole is custom order cost me $25 for two chassis (not that bad). The top plate I did it myself.

Best Regards,
Iggy
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm


Return to eiclone

Who is online

Users browsing this forum: No registered users and 13 guests