MacL wrote:Hi,
Please confirm R-19 value. Conflict from schematic to mouser list (300k or 330k?)
Thanks,
MacL wrote:Hi all,
Grounding question.
Installing the PCB under metal chassis (not using top plate option).
Supply is grounded to chassis. Should I have a ground wire from chassis ground to one of the three "ground" holes on the PCB?
VCT power leads are grounded/terminated per instructions to (GND on PCB and Hole "a"). I am trying to be wary of a ground loop but it seems like I should ground PCB to chassis-not just transformer center taps.
Thanks All!
Users browsing this forum: No registered users and 0 guests