'gtasound wrote:Could a 600VCT power transformer be used instead of 660VCT
gtasound wrote:Question? I would like to use a 350-0-350 power transformer to run KT120 & KT88 only, changing the cathode resistors R17,R19,R18,R20
to 800 ohms each giving 400 ohms per cathode at 32 watt dissipation, would the 6sl7 still be alright to drive the KT120 & KT88??.
jukingeo wrote:I was just following this thread and I was curious as to what a KT-88 Clementine would put out power wise?
gtasound wrote: would it be ok to use a 15uF 600V ASC film cap instead of
the Electro as the first cap I feel more comfortable using the higher voltage cap , have modeled this in PSUDII
and it seems to be ok, also would like to use 1K cathode resistors instead of 800 ohms to bring the dissipation
down for the KT88's.
gtasound wrote: would it be ok to use a 15uF 600V ASC film cap instead of
the Electro as the first cap I feel more comfortable using the higher voltage cap , have modeled this in PSUDII
and it seems to be ok, also would like to use 1K cathode resistors instead of 800 ohms to bring the dissipation
down for the KT88's.
Users browsing this forum: No registered users and 69 guests