I have an ugly mains transformer (the one in the pic above) from excellent Frag Jan Zuerst (
www.fragjanzuerst.de) in Germany. The tranny is very good, but the black paint peels off easily making a bad appearance.
This fella is rated 2*230V 0,1A 6,3V 1,2A 6,3V 3A. Guess that will be enough.
As OP trannies I am using a pair of cheap British ones:
VT1087.
The rest of components will hopefully be found in my stores, but I guess the caps in the PSU have to be ought from somewhere. Also I want to include a volume potentiometer, but I guess adding a 100K pot with the wiper connected to the grid of the 6SL7 through a 1K resistor will work fine.
There will due to the geometry be some issues with connectors but I have possibly an solution for that ...
Have to remember to bring the metalwork back to my job tomorrow with the drill for the sockets.