Ty_Bower wrote:I would add the RCA input jacks and speaker binding posts to my Mouser order. Mouser also sells Triad filter chokes. I'll go look up the part numbers for my favorites, and post them here.
Binding posts:
Kobiconn 164-19B2-EX, $3.68 per set
Triad filter choke:
C-24X, 1H, 50 ohm, $8.77 each
Alternate Triad chokes:
C-8X, 7H, 240 ohms, $9.86
C-7X, 10H, 270 ohms, $11.74
apurcell22 wrote:I noticed the schematic for the 6L6 variant calls for 600V coupling caps and the bom has 400V. Is 400V sufficient?
Al
miker wrote:Not sure if it has already been noted but, the voltage chart for the 1626 version shows 24V (cathode voltage) on pin 1 and 0V for pin 8. These two readings should be reversed, pin 8 is the cathode.
I just powered up my Clemy and reading 0 V on pin 1 (expecting 24 V) had me freaked out at first. Pictures to follow.
Users browsing this forum: No registered users and 40 guests