FS all the above and a new chassis with rear and face plates = fits a Mid sized Marshall J45 cab, (1) GE 5R4GY used, most are nos some are used.
the 12ax7wa are nos philips, rca nos 6sl7gt, rca nos 6bq5 quad, general rohren el84 (70's reflector i think - pan getters), 4-12AU7's labeled CONN - looks like rca relabels NOS i think with "D" getters, some (2) used philco, hammond (1) and (2) B&H 12AU7's, 4-12xxx shields (military surplus), 1-6L6G rca used.
150$ for tubes + freight
50$ for chassis with face plates (2 plates) + freight
trannies 25$ + freight
buyer pays freight for all items
make me an offer for the whole lot and i'll knock off some bucks!!!
send me an email and ask for pics of tubes or chassis. i decided not to build an amp.
i have a used PT 435 435 VAC @250 MA 80V bias tap (Merit 3156) and an unknown OT (says H4103 on it) i will throw in for an extra 25$ if the freight is paid by a buyer. they were salvaged out of an old Heathkit M5 that was fired up, lite the tubes shut down and salvaged = not the correct PT or OT for the Heathkit. i sold the chassis, cage and the Heathkit choke. a friend got the Sylvania 6L6G out of it. might have a couple of 12BH7's to throw in free if i can find them (i know they are packed in my closet somewhere!!!)
total weight on the trannies are about 16-17 pounds for both (pt goes a hair over 10.5 and the OT goes a bit under 5 pounds)