blackheart handsome devil combo

a fine line between stupid and clever

blackheart handsome devil combo

Postby fender93 » Tue May 12, 2015 7:47 am

I have an amp Blackheart handsome devil combo year 2010.
Its time to change the tubes , I tried to open the back panel but after opening all the back panel screws and the two side screw
The panel is not able to open .
I have a new tubes reference to the amp spec.
Please advise how can I open it and replace the tubes ?
if you have a special instructions it will help .
(???) (???)
Posts: 1
Joined: Tue May 12, 2015 12:50 am

Re: blackheart handsome devil combo

Postby TomMcNally » Tue May 12, 2015 8:21 am

Some gently prying with a butter knife all around the panel is what I've read.
Everyone says they are very tight.

Good luck!
User avatar
Darling du Jour
Posts: 2728
Joined: Sat Nov 19, 2005 2:19 pm
Location: Northfield, NJ

Re: blackheart handsome devil combo

Postby Geek » Tue May 12, 2015 11:35 am

Sometimes the tolex glue seeps out and makes them a pain to open.

Then there's amps that have seen too many kilometers on the road gigging.... I don't even want to contemplate what's gluing them together, I just put on surgical gloves and fix it (sick) (lol) :o)
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Return to guitar amps

Who is online

Users browsing this forum: No registered users and 1 guest