I rounded over the outside edges, and rough sanded(220 grit)
As I sand this box, I can tell from the tone it gives off that this is going to be good. Pine adds its own warm resonance to a cabinet that ply or mdf doesn't.
I want to stain the box, but I'm not sure How to seal the wood first. testing stain on scraps, its verry blotchy on the bare wood.
Final finish will be either linseed oil, or shellac.
I'm out of wood, so no more work till this weekend. I still have to cut the baffle, back side, and do the engraving for the jack plate.
I'm going to add a built in handle too.
John C.
[/img]