Paul Guitar Amp Model 205

a fine line between stupid and clever

Paul Guitar Amp Model 205

Postby CpuZapper » Thu Oct 22, 2009 5:54 pm

I found this sitting by the side of the road just waiting for someone to take it home. The fuse holder top is missing.
A google found one that looks very similar but it only had one 8 inch speaker, this unit has two 8 inch speakers.

I should take it apart and check it all out.
Does anyone have a schematic or any tips or tweaks for this old unit?

PAUL Model 205
Pine Electronic products Co. is this the same as Pepco?
User avatar
CpuZapper
 
Posts: 116
Joined: Tue Jul 03, 2007 7:35 pm
Location: Alberta, Canada

Re: Paul Guitar Amp Model 205

Postby Geek » Thu Oct 22, 2009 7:54 pm

CpuZapper wrote:Pine Electronic products Co. is this the same as Pepco?


Yup!

http://www.pepcotubeamp.co.cc/history.htm

Appears to be some schematics here:
http://www.pepcotubeamp.co.cc/Pepco-Gal ... index.html

Cheers!
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Postby CpuZapper » Mon Aug 13, 2012 1:32 pm

I have not found a schematic for the Paul Model 205. From what I see on the web most have the Model 201 without the power transformer and different tubes.
Tube compliment for the Model 205 is 5Y3GT, only one 6V6GT and two 12ax7a’s.
This unit has 4 jacks, three pots (Tremolo, Volume and Tone).
I think one of the 12AX7A’s is used for the Tremolo circuit, not sure.
I will try to trace out the circuit and compare it to some of the Fender Amps.

What I found so far:
This Amp only has an older 2 wire power cord.
Should I use a newer 2 wire cord for polarity or use a 3 wire cord, will the 3 wire cause more hum?

Not sure what caused the failure but the lamp is open (Fuse holder is missing) and it looks like a small amount of liquid was on the 6V6GT tube (Stain on the tube). Will test the tubes next.
Is it ok to use a Varic at low voltage without tubes to check the power transformer outputs?
User avatar
CpuZapper
 
Posts: 116
Joined: Tue Jul 03, 2007 7:35 pm
Location: Alberta, Canada

Postby CpuZapper » Tue Aug 14, 2012 6:33 pm

User avatar
CpuZapper
 
Posts: 116
Joined: Tue Jul 03, 2007 7:35 pm
Location: Alberta, Canada

Postby nyazzip » Thu Aug 16, 2012 2:15 pm

that's groovy! probably just a fender champ clone, with tremolo.
the tolex is very unusual, and that grill cloth reminds me of the drapes from my parents house from the late '60s
O:)
...i wish i could find something cool like that on the curb/at a dump
User avatar
nyazzip
KT88
 
Posts: 1073
Joined: Wed Jan 09, 2008 1:24 am

Postby EWBrown » Thu Aug 16, 2012 9:24 pm

Where are John, George and Ringo ;) (lol)

Neat retro-looking (OH, it IS really retro) small amp (love) [:)

Good shape for an oldie, not all tattered and mouldy.

/edB
Real Radios Glow in the Dark
User avatar
EWBrown
Insulator & Iron Magnate
 
Posts: 6389
Joined: Wed Mar 19, 2003 6:03 am
Location: Now located in Clay County, NC !

Postby Shannon Parks » Fri Aug 17, 2012 4:31 am

I bid up a similar Silvertone amp (without a PT) at an auction last year to over $100. These little amps have some killer tone and are pretty cool. Keeping an eye on the curb is always a good thing (I mean, as long as you you keep your eyes on the road!).

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3764
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Postby CpuZapper » Sun Aug 19, 2012 7:12 pm

Thanks, I'm looking forward to hearing this thing play.
I could use some of your expertise.

I want to make a schematic for this amp before I change anything or power it on. What are the values of the following Ceramic caps.
Ceramic Caps, are they all uf?
.005 1KV AE
.01P CRL
.02 Hi-Q

Thanks for your time.
User avatar
CpuZapper
 
Posts: 116
Joined: Tue Jul 03, 2007 7:35 pm
Location: Alberta, Canada

Postby EWBrown » Mon Aug 20, 2012 9:22 am

Those cap values are all in micro-farads, no strange and arcane secret codes (???) :/ ;) (lol)

/ed B
Real Radios Glow in the Dark
User avatar
EWBrown
Insulator & Iron Magnate
 
Posts: 6389
Joined: Wed Mar 19, 2003 6:03 am
Location: Now located in Clay County, NC !

Postby CpuZapper » Mon Aug 20, 2012 11:39 am

Thanks for the confirmation Ed. I was thinking the P could be a multiplier.

I have a .005 uf on all the input jacks were they put in to roll of the highs and are they a waste or a necessity?

This unit has 4 input jacks I could always try both ways later.
User avatar
CpuZapper
 
Posts: 116
Joined: Tue Jul 03, 2007 7:35 pm
Location: Alberta, Canada


Return to guitar amps

Who is online

Users browsing this forum: No registered users and 2 guests

cron