Bingo Boys! We have that "Push Pull Perfection" going on! I was first in line at Radio Shack to get a 10K 1/4W carbon Film Resistor. I ended up buying the 500 assortment pack! Ran a 10K across R3, for a 5K result. The amp biases perfectly, per Shannon's board instructions. 5K for R3 seems to put me close to mid point on the 10K wipers. At full counterclockwise, I am about 20ma or so. I biased at 40ma, and was able to balance easily to zero. EL34 tube temps are now all at 350f. My hats off to you folks for the help, and a fine product.
Mike