Hi,
Restoring a friend's ST70 that is missing its bottom plate. I want to install one as operating without it (depending what it's sitting on) is a little bit dangerous with all that wire exposed. I've been looking online and haven't found anyone selling just the bottom plate, it's either the chassis or the chassis WITH the bottom plate. Anyone know of anyone just selling the bottom plate by itself?
Thanks,
Chris
ST70 bottom plate available?
5 posts
• Page 1 of 1
ST70 bottom plate available?
by zogher » Wed Apr 14, 2010 4:53 pm
- zogher
- Posts: 9
- Joined: Tue Apr 13, 2010 5:34 pm
by Quad » Thu Apr 15, 2010 12:10 am
Available from Triode, but pricey.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0436164311
It shouldn't be too hard to fabricate a cheap one out of
mild steel, aluminum or perforated sheet. Any local
sheet metal shop with a brake can make two bends.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0436164311
It shouldn't be too hard to fabricate a cheap one out of
mild steel, aluminum or perforated sheet. Any local
sheet metal shop with a brake can make two bends.
- Quad
- KT88
- Posts: 254
- Joined: Mon Jan 14, 2008 6:54 am
- Location: India
by Geek » Thu Apr 15, 2010 5:29 am
Holy shite! :-o
I guarantee that's about $5 of steel and 20 minutes of labour for the holes.
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
-
Geek - KT88
- Posts: 3585
- Joined: Sun Oct 21, 2007 3:01 am
- Location: Chilliwack, British Columbia
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 12 guests