by Geek » Wed Oct 14, 2009 6:13 pm
Yeah, modular would be better.
The shape a PCB would have to be to be a one-board-drop-in would be such an odd shape, there would be waste. Far too expensive and you're locked in on one type of driver/output.
Now if we made them modular, you could swap drivers and output boards at will. With appropriate iron and PS board, you could go from EL34 to 6L6GC to KT66/77/88, etc.
A configurable amp! :-D
Cheers!
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.