justinsweber wrote:any sugestion on a specific model?
I want to be able to use almost any rectifer ... and just have it over built.
Antec toroids are "over built" (whatever that means).
Below, the transformer has 400V x 2 secondaries with 500 ma per secondary. You could series the secondaries at 400-0-400 for a FW rectifier or parallel the secondaries for a FWB rectifier. You'll get about +565V from either configuration.
At 54 bucks, what a deal.
It also has (2) 70 volt bias taps. The 2 taps can be put through a FWB for about -100V bias voltage. Pretty cool.
When I get some funds, I will get one for a stereo SE 813 amp in triode mode. I am going to use it with a voltage doubler. With a doubler, you can tap off half of the voltage to run the drive circuity. This avoids dropping the full B+ with resistors.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0192771510