Page 1 of 1
Capacitor part #s and help needed for Power supply board
Posted:
Sat Jan 31, 2009 6:44 pmby burnedfingers
I purchased a bare Triode Electronics Dynaco Stereo 70 power supply board and I am having trouble trying to find capacitors that are 20mmX25mm for the first, third and forth caps and 25mmX25mm for the second caps. These would be C1,C2,C5,C6,C7,and C8 for the 20mmX25mm size and 25mmX25mm for the C3, and C4 caps. Any part number help would be appreciated.
Posted:
Sat Jan 31, 2009 8:04 pmby Geek
Hi,
Did you check Digikey? They have a nice selection of Panasonic caps in various sizes for same values of capacitance :)
Cheers!
Posted:
Sat Jan 31, 2009 9:46 pmby burnedfingers
Everything I find is larger than what will fit on the board.
Tried Mouser and Digikey both
I will search for Panasonic again
Thanks
Posted:
Sun Feb 01, 2009 7:54 amby burnedfingers
I believe that after the 6th or 7th go around I finally found what I need to populate the board.
I will post the part numbers in case someone else is also needing to stuff a board.
Caps C1,and C2 PN P6139-ND
Caps C3, and C4 PN P11744-ND
Caps C5, C6, C7, and C8 PN P11740-ND
Caps C11, and C12 PN P12125-ND
Caps C13, C14, C15, C16 PN P12157-ND
Caps C9, and C10 PN P5597-ND
I believe these caps will work but if you use the numbers you may want to double check and see if I have made a mistake before you submit your order.
The resistors I ordered are as follows
22k 2W PN PPCKW-2CT-ND
10K 1W PN PPC10KW-1CT-ND
6.8K 2W PN BC6.8KW-2CT-ND
330K 1/2W PN PPCHJ330KCT-ND
Posted:
Sat Feb 07, 2009 5:12 amby burnedfingers
Received the caps and resistors and everything fits correctly so the list is correct as it stands.