Capacitor part #s and help needed for Power supply board

knowledge base for the classic Dynaco ST70

Capacitor part #s and help needed for Power supply board

Postby burnedfingers » Sat Jan 31, 2009 6:44 pm

I purchased a bare Triode Electronics Dynaco Stereo 70 power supply board and I am having trouble trying to find capacitors that are 20mmX25mm for the first, third and forth caps and 25mmX25mm for the second caps. These would be C1,C2,C5,C6,C7,and C8 for the 20mmX25mm size and 25mmX25mm for the C3, and C4 caps. Any part number help would be appreciated.
burnedfingers
KT88
 
Posts: 640
Joined: Mon Sep 05, 2005 6:38 am

Postby Geek » Sat Jan 31, 2009 8:04 pm

Hi,

Did you check Digikey? They have a nice selection of Panasonic caps in various sizes for same values of capacitance :)

Cheers!
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Postby burnedfingers » Sat Jan 31, 2009 9:46 pm

Everything I find is larger than what will fit on the board.

Tried Mouser and Digikey both

I will search for Panasonic again

Thanks
burnedfingers
KT88
 
Posts: 640
Joined: Mon Sep 05, 2005 6:38 am

Postby burnedfingers » Sun Feb 01, 2009 7:54 am

I believe that after the 6th or 7th go around I finally found what I need to populate the board.
I will post the part numbers in case someone else is also needing to stuff a board.
Caps C1,and C2 PN P6139-ND

Caps C3, and C4 PN P11744-ND

Caps C5, C6, C7, and C8 PN P11740-ND

Caps C11, and C12 PN P12125-ND

Caps C13, C14, C15, C16 PN P12157-ND
Caps C9, and C10 PN P5597-ND
I believe these caps will work but if you use the numbers you may want to double check and see if I have made a mistake before you submit your order.

The resistors I ordered are as follows

22k 2W PN PPCKW-2CT-ND

10K 1W PN PPC10KW-1CT-ND

6.8K 2W PN BC6.8KW-2CT-ND

330K 1/2W PN PPCHJ330KCT-ND
burnedfingers
KT88
 
Posts: 640
Joined: Mon Sep 05, 2005 6:38 am

Postby burnedfingers » Sat Feb 07, 2009 5:12 am

Received the caps and resistors and everything fits correctly so the list is correct as it stands.
burnedfingers
KT88
 
Posts: 640
Joined: Mon Sep 05, 2005 6:38 am


Return to st70

Who is online

Users browsing this forum: No registered users and 20 guests

cron