Hi folks.
Thought this thread might help some newbies (and 'in-the-middle' bees like me!) or those upgrading the caps in their ST70s.
The accepted wiring scheme for the newer quad caps seems to be:
40uF --> choke --> 80uF --> 6K8 --> 30uF --> 22K --> 20uF
What is the consensus on wiring to points 19 and 20 on the original driver boards? Is it best for the 30uF tab to be soldered to pin 20, and the 20uF section to pin 19, or doesn't it matter?
Secondly, if using a modern Triode 'Dyna-Clone' power transformer, do those 6K8 and 22K resistors on the Quad cap need their values changed?
Thanks!
- John