Just about finished the SDS board, all except for...

[wiredbecker]

Just about finished the SDS board, all except for these two small caps.



According to Triode, C8 and C7 call for two .022 600V film capacitors.
They sent me these two small orange drop looking caps with
F223K c 630MPP1 printed on them.



When I plug that info into digikey,
I get .022 100V or .022 50V.
They sent the wrong caps right?

[TomMcNally]

They are .022 at 630 volts, probably made by Xicon. Put 630MPP into a Mouser.com search box and you'll find 'em.

[Shannon Parks]

Since these are the filament ground reference caps, I wouldn't worry about the max voltage anyhow. They'll be close to ground.

[wiredbecker]

Thanks guys. I'm having a blast putting all these projects together. Hey Shannon, is your diytube driver board compatible with this here sds board?

[Shannon Parks]

Thanks guys. I'm having a blast putting all these projects together. Hey Shannon, is your diytube driver board compatible with this here sds board?

Yes it is.