Wooden chassis for tubeamps

barter, sell, and trade here first

Wooden chassis for tubeamps

Postby toti » Fri Jan 15, 2016 3:14 am


I still produce chassis for tubeamps. Unfortunately, without metal parts. I can not find a suitable cheap manufacturer which deals with laser cutting. :(

In turn I can draw for you any individual layout of metal plates in DXF format. To this I need a sketch according to your idea with dimensions. Can be hand-drawn sketch too. The individual drawing will cost depending on the complexity. Please remember, I can not make metal plates!!! Only DXF drawings.

I can make for you custom design and custom dimensions by your idea. Of course wooden parts only. If you are interested please send me a message!

Here are some pictures of the current offer.

Chassis frame is hand built by real solid cherry/oak/padouk/amaranth -wood. The wood is treated with transparent varnish. Natural color, no pickled! Please remember, that it is a real handwork. It hase a small inaccuracies.

On the front side is formed a recess for the potentiometers, switch, leds, etc.

External Dimensions 360 x 310 x 60 mm
Internal Dimensions 320 x 270 x 54 mm
Dimensions of Top and Bottom metal plate may be: 340 x 290 mm (the same)
Dimensions of Back metal panel (plate) may be: 309 x 40 mm
Recess for top and bottom plate the same: 3 mm
Recess for back panel: 2 mm
Net Weight: about 1,2 kg

If you want to use thinner metal plates, the recess can be reduced with washers.

Prices and shipping costs are available on my new website at: http://tubeamp-chassis.com.

I hope that you like them.

Have Fun!

tubeamp_chassis-1.jpg (666.17 KiB) Viewed 3488 times
tubeamp_chassis-2.jpg (422.48 KiB) Viewed 3488 times
tubeamp_chassis-3.jpg (293.43 KiB) Viewed 3488 times
tubeamp_chassis-4.jpg (373.87 KiB) Viewed 3488 times
tubeamp_chassis-5.jpg (116.02 KiB) Viewed 3488 times
tubeamp_chassis-6.jpg (112.51 KiB) Viewed 3488 times
tubeamp_chassis-7.jpg (345.06 KiB) Viewed 3488 times
User avatar
Posts: 23
Joined: Fri Jan 10, 2014 12:56 am
Location: Slovak Republic (Slovakia)

Re: Wooden chassis for tubeamps

Postby Geek » Fri Jan 15, 2016 12:09 pm

Laser cutting has gone through the roof, yet laser cutters are getting cheap enough for the weekend DIY'er (go figure).

I'm in Canada and we had to drop all our local guys, as cutting one plate costed more than getting the ENTIRE case custom built AND delivered from China (sick)
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Return to preBay

Who is online

Users browsing this forum: No registered users and 1 guest