Pair KS8878
Posted: Wed Aug 05, 2015 11:22 am
I have a pair of these potted monsters. 1200VCT at ~200-250mA
Heater Windings:
Pins 8/10: 6.34V @ 2.5A under load
Pins 11-13: 6.35V @ 7.5A under load
There is also a 5V winding that I did not test current on, but I am sure it is beefy as well seeing how much current the 6.3V windings will do.
I sanded these down and refinished them in textured black. They are labeled on the bottom and one pin has been fixed via soldered romex. The insulator is fine. I started a project, and it fell short during a move, kids, and life.
Asking $275 shipped in CONUS
Heater Windings:
Pins 8/10: 6.34V @ 2.5A under load
Pins 11-13: 6.35V @ 7.5A under load
There is also a 5V winding that I did not test current on, but I am sure it is beefy as well seeing how much current the 6.3V windings will do.
I sanded these down and refinished them in textured black. They are labeled on the bottom and one pin has been fixed via soldered romex. The insulator is fine. I started a project, and it fell short during a move, kids, and life.
Asking $275 shipped in CONUS