Wooden Chassis (not only) for Dynaco ST70

barter, sell, and trade here first

Re: Wooden Chassis (not only) for Dynaco ST70

Postby toti » Thu Apr 24, 2014 11:52 pm

Hi,

I modified the description. Through currency fluctuations prices are stated in Euro.
Unfortunately, I do not work with cocobolo. :(

toti
User avatar
toti
 
Posts: 23
Joined: Fri Jan 10, 2014 12:56 am
Location: Slovak Republic (Slovakia)

Re: Wooden Chassis (not only) for Dynaco ST70

Postby toti » Mon Jun 16, 2014 1:26 pm

Hello,

Some photos ;)

Regards,
toti
Attachments
04.jpg
04.jpg (219.58 KiB) Viewed 75710 times
06.jpg
06.jpg (199.29 KiB) Viewed 75710 times
05.jpg
05.jpg (244.55 KiB) Viewed 75710 times
01.jpg
01.jpg (297.73 KiB) Viewed 75710 times
User avatar
toti
 
Posts: 23
Joined: Fri Jan 10, 2014 12:56 am
Location: Slovak Republic (Slovakia)

Re: Wooden Chassis (not only) for Dynaco ST70

Postby Ritchie » Sun Nov 23, 2014 8:46 am

Do you have any chassis for st35 board?

Thanks,
Ritchie
Ritchie
 
Posts: 11
Joined: Tue Apr 27, 2010 7:40 pm
Location: ontario,canada

Re: Wooden Chassis (not only) for Dynaco ST70

Postby Geek » Sun Nov 23, 2014 1:05 pm

A customer comes into my store all excited... "Gregg, look at the chassis I found and it fits your DynaMutt perfectly!"

You're getting pretty famous! (y)

Image
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: Wooden Chassis (not only) for Dynaco ST70

Postby toti » Sun Nov 23, 2014 2:34 pm

Hello,

Sorry, for ST35 I have not. :(

Tichomir

Ritchie wrote:Do you have any chassis for st35 board?

Thanks,
Ritchie
Last edited by toti on Sun Nov 23, 2014 2:36 pm, edited 1 time in total.
User avatar
toti
 
Posts: 23
Joined: Fri Jan 10, 2014 12:56 am
Location: Slovak Republic (Slovakia)

Re: Wooden Chassis (not only) for Dynaco ST70

Postby toti » Sun Nov 23, 2014 2:35 pm

Thanks Greg! :)

Tichomir

Geek wrote:A customer comes into my store all excited... "Gregg, look at the chassis I found and it fits your DynaMutt perfectly!"

You're getting pretty famous! (y)

Image
User avatar
toti
 
Posts: 23
Joined: Fri Jan 10, 2014 12:56 am
Location: Slovak Republic (Slovakia)

Re: Wooden Chassis (not only) for Dynaco ST70

Postby EWBrown » Sun Nov 23, 2014 2:51 pm

From the first posting:

On the top Stainless Steel sheet are pre-drilled holes for Dynaco ST70 with Diytube driver
Real Radios Glow in the Dark
User avatar
EWBrown
Insulator & Iron Magnate
 
Posts: 6389
Joined: Wed Mar 19, 2003 6:03 am
Location: Now located in Clay County, NC !

Re: Wooden Chassis (not only) for Dynaco ST70

Postby Geek » Mon Nov 24, 2014 12:25 am

EWBrown wrote:From the first posting:

On the top Stainless Steel sheet are pre-drilled holes for Dynaco ST70 with Diytube driver


Same tube position I think for 1/2 dozen makes of 3-tube boards ;)
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: Wooden Chassis (not only) for Dynaco ST70

Postby tomlang » Mon Nov 24, 2014 8:03 am

Here is a .dxf of the tubesforhifi vta board FYI that I measured off a board a while ago. It also has holes to drill for the bias pots if you utilize stand-up multi-turn pots and not the laydown single turn specified.
Attachments
vta board.dxf
(70.17 KiB) Downloaded 670 times
Last edited by tomlang on Mon Nov 24, 2014 1:06 pm, edited 2 times in total.
User avatar
tomlang
 
Posts: 192
Joined: Sat Sep 26, 2009 8:14 pm
Location: Augusta, GA

Re: Wooden Chassis (not only) for Dynaco ST70

Postby toti » Mon Nov 24, 2014 8:52 am

Thanks!

tomlang wrote:Here is a .dxf of the tubesforhifi vta board FYI that I measured off a board a while ago. It also has holes to drill for the bias pots if you utilize stand-up multi-turn pots and not the laydown single turn specified.

This is a .dxf file. To use it replace doc with dxf. I can't upload a dxf so have to fool the bulletin board.
User avatar
toti
 
Posts: 23
Joined: Fri Jan 10, 2014 12:56 am
Location: Slovak Republic (Slovakia)

Re: Wooden Chassis (not only) for Dynaco ST70

Postby Shannon Parks » Mon Nov 24, 2014 10:23 am

Thanks for the heads up, Tom! DXFs are permitted attachments now.

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3764
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: Wooden Chassis (not only) for Dynaco ST70

Postby tomlang » Tue Nov 25, 2014 8:44 am

Hi, are you getting the chassis top plates laser cut? Can you fabricate just the top plate?

For information, I am attaching a draft design for a top plate for a metal chassis I already have. It is an 18 inch by 13 inch size top plate. Can you provide an estimate of this cut in aluminum and stainless steel? What about shipping costs to Georgia, USA?

Thanks!
Attachments
black chassis top for estimate.dxf
(638.92 KiB) Downloaded 659 times
User avatar
tomlang
 
Posts: 192
Joined: Sat Sep 26, 2009 8:14 pm
Location: Augusta, GA

Re: Wooden Chassis (not only) for Dynaco ST70

Postby toti » Tue Nov 25, 2014 11:29 am

Hello Tom,

Sorry, I can not fabricate the top plate of individual production. Individual - low pieces laser cutting is very expensive.

Tichomir

tomlang wrote:Hi, are you getting the chassis top plates laser cut? Can you fabricate just the top plate?

For information, I am attaching a draft design for a top plate for a metal chassis I already have. It is an 18 inch by 13 inch size top plate. Can you provide an estimate of this cut in aluminum and stainless steel? What about shipping costs to Georgia, USA?

Thanks!
User avatar
toti
 
Posts: 23
Joined: Fri Jan 10, 2014 12:56 am
Location: Slovak Republic (Slovakia)

Re: Wooden Chassis (not only) for Dynaco ST70

Postby DeathRex » Wed Nov 26, 2014 10:02 am

I think Wesco charges $70 for laser set up, plus laser time and materials.
At first I wanted to be a ET. Now I are one.
User avatar
DeathRex
KT88
 
Posts: 1014
Joined: Wed Nov 18, 2009 8:13 pm
Location: Cortez, CO

Re: Wooden Chassis (not only) for Dynaco ST70

Postby Ritchie » Wed Nov 26, 2014 7:10 pm

How many pre-orders would you require to consider doing an st35 chassis?
Ritchie
 
Posts: 11
Joined: Tue Apr 27, 2010 7:40 pm
Location: ontario,canada

Previous

Return to preBay

Who is online

Users browsing this forum: No registered users and 12 guests