Hello highflyin,
Yes. The holes match with Dynaco ST 70. One pic above shows an assembled amplifier with Triode Electronics transformers and Diytube driver.
Have a nice day!
toti
Wooden Chassis (not only) for Dynaco ST70
45 posts
• Page 2 of 3 • 1, 2, 3
Re: Wooden Chassis (not only) for Dynaco ST70
by toti » Thu Jan 23, 2014 11:26 pm
-
toti - Posts: 23
- Joined: Fri Jan 10, 2014 12:56 am
- Location: Slovak Republic (Slovakia)
Re: Wooden Chassis (not only) for Dynaco ST70
by MontanaWay » Sat Mar 29, 2014 9:32 am
Hi toti,
are you still selling these wooden chassis?, if yes, do you have plain units, that is, with no holes drilled?, thanks!
are you still selling these wooden chassis?, if yes, do you have plain units, that is, with no holes drilled?, thanks!
- MontanaWay
- Posts: 7
- Joined: Fri Mar 28, 2014 6:37 pm
- Location: Cameron, Montana
Re: Wooden Chassis (not only) for Dynaco ST70
by toti » Sat Mar 29, 2014 1:45 pm
Hello MontanaWay,
Thank you for your interest.
The old pieces are sold. Soon I will offer some new pieces. Those are precisely manufactured. Will be more expensive.
I will offer also top plate without hole. 3 mm aluminum material.
I will offer an interesting design also, it is made of wood. Can look the picture!
I'm coming soon.
toti
Thank you for your interest.
The old pieces are sold. Soon I will offer some new pieces. Those are precisely manufactured. Will be more expensive.
I will offer also top plate without hole. 3 mm aluminum material.
I will offer an interesting design also, it is made of wood. Can look the picture!
I'm coming soon.
toti
- Attachments
-
- 5000.jpg (152.3 KiB) Viewed 90132 times
-
- 702.jpg (243.4 KiB) Viewed 90132 times
-
toti - Posts: 23
- Joined: Fri Jan 10, 2014 12:56 am
- Location: Slovak Republic (Slovakia)
Re: Wooden Chassis (not only) for Dynaco ST70
by MontanaWay » Sat Mar 29, 2014 9:52 pm
OK, sounds good, thanks for your reply!
- MontanaWay
- Posts: 7
- Joined: Fri Mar 28, 2014 6:37 pm
- Location: Cameron, Montana
Re: Wooden Chassis (not only) for Dynaco ST70
by tomlang » Sun Mar 30, 2014 7:47 am
Hammond output transformers? Which model? And how do you get them with the plated end bells?
-
tomlang - Posts: 192
- Joined: Sat Sep 26, 2009 8:14 pm
- Location: Augusta, GA
Re: Wooden Chassis (not only) for Dynaco ST70
by toti » Sun Mar 30, 2014 9:33 am
1645A - Easy Wire. End bells was painted by me.
toti
toti
-
toti - Posts: 23
- Joined: Fri Jan 10, 2014 12:56 am
- Location: Slovak Republic (Slovakia)
Re: Wooden Chassis (not only) for Dynaco ST70
by toti » Wed Apr 09, 2014 1:36 pm
DIY Tube amplifier chassis/enclosure/cabinet
Chassis frame is hand built by real solid beechwood (oak, cherry). The wood is treated with transparent varnish.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Brush Finish Stainless Steel - thickness 1,5 mm
Back: Mirror finished Stainless Steel - thickness 1,5 mm
Bottom: Painted metal sheet - thickness 1,2 mm
Dimensions 365 x 315 x 70 mm
Inner Dimensions 315 x 265 x 45 mm
Dimensions of the top Stainless Steel sheet: 340 x 290 mm
Weight: about 3 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
On the top Stainless Steel sheet are pre-drilled holes:
Power transformer universal - from EI105 to EI120 (Triode USA PA521 also),
Holes for output transformers Triode USA A-470
Holes for Diytube driver Dynaco ST70 or tube4hifi octal driver Dynaco ST70 - selectable.
Please tell me what top Stainless Steel sheet would you like!
Price 110 Euro. World wide shipping cost economy: 36 Euro, priority: 48 Euro. Delivery time about 15 - 21 days.
!!!Possible on an individual hole Layout if you send layout in the DXF file [color=#FF0000]+43 Euro. When I create the the DXF files, then +20 Euro.!!!
2014. nov. 23
Individual hole Layout no longer possible.
Chassis frame is hand built by real solid beechwood (oak, cherry). The wood is treated with transparent varnish.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Brush Finish Stainless Steel - thickness 1,5 mm
Back: Mirror finished Stainless Steel - thickness 1,5 mm
Bottom: Painted metal sheet - thickness 1,2 mm
Dimensions 365 x 315 x 70 mm
Inner Dimensions 315 x 265 x 45 mm
Dimensions of the top Stainless Steel sheet: 340 x 290 mm
Weight: about 3 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
On the top Stainless Steel sheet are pre-drilled holes:
Power transformer universal - from EI105 to EI120 (Triode USA PA521 also),
Holes for output transformers Triode USA A-470
Holes for Diytube driver Dynaco ST70 or tube4hifi octal driver Dynaco ST70 - selectable.
Please tell me what top Stainless Steel sheet would you like!
Price 110 Euro. World wide shipping cost economy: 36 Euro, priority: 48 Euro. Delivery time about 15 - 21 days.
!!!Possible on an individual hole Layout if you send layout in the DXF file [color=#FF0000]+43 Euro. When I create the the DXF files, then +20 Euro.!!!
2014. nov. 23
Individual hole Layout no longer possible.
- Attachments
-
- 31.jpg (190.92 KiB) Viewed 90079 times
-
- 39.jpg (140.47 KiB) Viewed 90079 times
-
- 33.jpg (151.76 KiB) Viewed 90079 times
-
- 37.jpg (181.47 KiB) Viewed 90079 times
-
- 36.jpg (196.08 KiB) Viewed 90079 times
Last edited by toti on Sun Nov 23, 2014 2:53 pm, edited 3 times in total.
-
toti - Posts: 23
- Joined: Fri Jan 10, 2014 12:56 am
- Location: Slovak Republic (Slovakia)
Re: Wooden Chassis (not only) for Dynaco ST70
by toti » Wed Apr 09, 2014 1:42 pm
Chassis frame is hand built by real solid oakwood (beech, cherry). The wood is treated with transparent varnish.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Aluminum - thickness 3 mm. Without surface treatment.
Back: Mirror finished Stainless Steel - thickness 1,5 mm.
Bottom: Painted metal sheet - thickness 1,2 mm.
Dimensions 370 x 340 x 70 mm
Inner Dimensions 315 x 265 x 45 mm
Dimensions of the top Stainless Steel sheet: 340 x 290 mm
Weight: about 2,5 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
Price 110 Euro. World wide shipping cost economy: 36 Euro, priority: 48 Euro. Delivery time about 15 - 21 days.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Aluminum - thickness 3 mm. Without surface treatment.
Back: Mirror finished Stainless Steel - thickness 1,5 mm.
Bottom: Painted metal sheet - thickness 1,2 mm.
Dimensions 370 x 340 x 70 mm
Inner Dimensions 315 x 265 x 45 mm
Dimensions of the top Stainless Steel sheet: 340 x 290 mm
Weight: about 2,5 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
Price 110 Euro. World wide shipping cost economy: 36 Euro, priority: 48 Euro. Delivery time about 15 - 21 days.
- Attachments
-
- 27.jpg (140.21 KiB) Viewed 90078 times
-
- 24.jpg (172.95 KiB) Viewed 90078 times
-
- 22.jpg (133.32 KiB) Viewed 90078 times
-
- 25.jpg (187.11 KiB) Viewed 90078 times
Last edited by toti on Thu Apr 24, 2014 11:19 pm, edited 1 time in total.
-
toti - Posts: 23
- Joined: Fri Jan 10, 2014 12:56 am
- Location: Slovak Republic (Slovakia)
Re: Wooden Chassis (not only) for Dynaco ST70
by toti » Wed Apr 09, 2014 1:47 pm
Chassis frame is hand built by real solid beechwood. The wood is treated with transparent varnish.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Real solid beechwood
Back: Brush Finish Stainless Steel - thickness 1,2 mm
Bottom: Painted metal sheet - thickness 1,2 mm
Dimensions 375 x 355 x 80 mm
Inner Dimensions 335 x 280 x 48 mm
Weight: about 3 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
On the top are pre-drilled holes for Dynaco ST70 (for Diytube driver) and universal holes for power transformer. No holes are drilled for output transformers.
Price 159 Euro. World wide shipping cost economy: 40 Euro, priority: 53 Euro. Delivery time about 15 - 21 days.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Real solid beechwood
Back: Brush Finish Stainless Steel - thickness 1,2 mm
Bottom: Painted metal sheet - thickness 1,2 mm
Dimensions 375 x 355 x 80 mm
Inner Dimensions 335 x 280 x 48 mm
Weight: about 3 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
On the top are pre-drilled holes for Dynaco ST70 (for Diytube driver) and universal holes for power transformer. No holes are drilled for output transformers.
Price 159 Euro. World wide shipping cost economy: 40 Euro, priority: 53 Euro. Delivery time about 15 - 21 days.
- Attachments
-
- 1.jpg (170.08 KiB) Viewed 90078 times
-
- 2.jpg (160.5 KiB) Viewed 90078 times
-
- 4.jpg (122.61 KiB) Viewed 90078 times
-
- 5.jpg (187.63 KiB) Viewed 90078 times
-
- 3.jpg (147.64 KiB) Viewed 90078 times
-
- dimensions.jpg (211.68 KiB) Viewed 90078 times
Last edited by toti on Thu Apr 24, 2014 11:23 pm, edited 1 time in total.
-
toti - Posts: 23
- Joined: Fri Jan 10, 2014 12:56 am
- Location: Slovak Republic (Slovakia)
Re: Wooden Chassis (not only) for Dynaco ST70
by Geek » Wed Apr 09, 2014 10:24 pm
Thank you for the measurements! 
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
-
Geek - KT88
- Posts: 3585
- Joined: Sun Oct 21, 2007 3:01 am
- Location: Chilliwack, British Columbia
Re: Wooden Chassis (not only) for Dynaco ST70
by MontanaWay » Sun Apr 20, 2014 8:50 am
toti wrote:DIY Tube amplifier chassis/enclosure/cabinet
Chassis frame is hand built by real solid beechwood (oak, cherry). The wood is treated with transparent varnish.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Brush Finish Stainless Steel - thickness 1,5 mm
Back: Mirror finished Stainless Steel - thickness 1,5 mm
Bottom: Painted metal sheet - thickness 1,2 mm
Dimensions 365 x 315 x 70 mm
Inner Dimensions 315 x 265 x 45 mm
Dimensions of the top Stainless Steel sheet: 340 x 290 mm
Weight: about 3 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
On the top Stainless Steel sheet are pre-drilled holes:
Power transformer universal - from EI105 to EI120 (Triode USA PA521 also),
Holes for output transformers Triode USA A-470
Holes for Diytube driver Dynaco ST70 or tube4hifi octal driver Dynaco ST70 - selectable.
Please tell me what top Stainless Steel sheet would you like!
Price $150. Shipping cost $49. I ship worldwide. Delivery time about 15 - 20 days.
Possible on an individual hole Layout if you send layout in the DXF file +$60. When I create the the DXF files, then +$20.
Hi toti,
nice chassis!
How much just for the wooden chassis, no metal plates, shipped to 59720, thank you.
- MontanaWay
- Posts: 7
- Joined: Fri Mar 28, 2014 6:37 pm
- Location: Cameron, Montana
Re: Wooden Chassis (not only) for Dynaco ST70
by toti » Sun Apr 20, 2014 10:28 am
Thanks!
Wooden parts without metal plates and without connectors: $80 + world wide shipping (weight up to 3kg) $36.
Wooden parts without metal plates and without connectors: $80 + world wide shipping (weight up to 3kg) $36.
-
toti - Posts: 23
- Joined: Fri Jan 10, 2014 12:56 am
- Location: Slovak Republic (Slovakia)
Re: Wooden Chassis (not only) for Dynaco ST70
by toti » Sun Apr 20, 2014 12:22 pm
Hello,
I'm uploading the images for the eyes stimulus... :)
Happy days!
toti
Added on 25/4/2014:
Chassis frame is hand built by real solid beechwood. The wood is pickled in swedish red and treated with transparent varnish.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Real solid beechwood
Back: Brush Finish Stainless Steel - thickness 1,2 mm
Bottom: Painted metal sheet - thickness 1,2 mm
Dimensions 375 x 355 x 80 mm
Inner Dimensions 335 x 280 x 48 mm
Weight: about 3,5 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
On the top are pre-drilled holes for Dynaco ST70 (for Diytube driver) and universal holes for power transformer. No holes are drilled for output transformers.
Price 184 Euro. World wide shipping cost economy: 40 Euro, priority: 53 Euro. Delivery time about 15 - 21 days.
I'm uploading the images for the eyes stimulus... :)
Happy days!
toti
Added on 25/4/2014:
Chassis frame is hand built by real solid beechwood. The wood is pickled in swedish red and treated with transparent varnish.
Please remember, that it is a real handwork. It hase a small visual fly in the ointment, small inaccuracies.
Top: Real solid beechwood
Back: Brush Finish Stainless Steel - thickness 1,2 mm
Bottom: Painted metal sheet - thickness 1,2 mm
Dimensions 375 x 355 x 80 mm
Inner Dimensions 335 x 280 x 48 mm
Weight: about 3,5 kg
On the back instrument panel are pre-assembled 2 x RCA socket, 2 x 3 banana socket 4 mm, power socket with fuse and switch.
On the top are pre-drilled holes for Dynaco ST70 (for Diytube driver) and universal holes for power transformer. No holes are drilled for output transformers.
Price 184 Euro. World wide shipping cost economy: 40 Euro, priority: 53 Euro. Delivery time about 15 - 21 days.
- Attachments
-
- 409-1.jpg (200.48 KiB) Viewed 90018 times
-
- 408-1.jpg (120.44 KiB) Viewed 90018 times
-
- 405-1.jpg (156.17 KiB) Viewed 90018 times
Last edited by toti on Thu Apr 24, 2014 11:32 pm, edited 1 time in total.
-
toti - Posts: 23
- Joined: Fri Jan 10, 2014 12:56 am
- Location: Slovak Republic (Slovakia)
Re: Wooden Chassis (not only) for Dynaco ST70
by highflyin9 » Thu Apr 24, 2014 8:17 pm
What's the cost of the unit above? (Shipped to U.S.). Do you use other more exotic woods like Cocobolo?
My DIY Electronics Blog: DIYAudioBlog.com
-
highflyin9 - Posts: 119
- Joined: Tue Jul 27, 2010 7:42 pm
- Location: East Coast
45 posts
• Page 2 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 7 guests