diytube.com

Needs sockets, and trim. Good platform if you hate metal work. An order backed out on me after I started. Included WBT RCAs and Fuse holder. The back is 1/8" aluminum with a ribbed effect, and the top plate is 16ga steel. Was going to be a line stage with phono. The power transformer is from Heathkit and it is a filled bell style to eliminate buzz.







$75 shipped CONUS

Blair

Are the five tube socket holes sized for 9 pin or octal

/ed B

Hi Ed,

Yes. Beltons to be specific. If you have top mount style, just leave the screws in place and they come up flush. If you have bottom mount style, remove the but and install the tube sockets to flush them.

Thanks,

Blair