$75 shipped CONUS
Blair
Preamp Chassis
3 posts
• Page 1 of 1
Preamp Chassis
by Blair » Wed Sep 11, 2013 3:01 pm
Needs sockets, and trim. Good platform if you hate metal work. An order backed out on me after I started. Included WBT RCAs and Fuse holder. The back is 1/8" aluminum with a ribbed effect, and the top plate is 16ga steel. Was going to be a line stage with phono. The power transformer is from Heathkit and it is a filled bell style to eliminate buzz.
$75 shipped CONUS
Blair
$75 shipped CONUS
Blair
- Blair
- KT88
- Posts: 1272
- Joined: Thu Nov 09, 2006 10:22 am
Re: Preamp Chassis
by EWBrown » Wed Sep 11, 2013 3:08 pm
Are the five tube socket holes sized for 9 pin or octal 
/ed B
/ed B
Real Radios Glow in the Dark
-
EWBrown - Insulator & Iron Magnate
- Posts: 6389
- Joined: Wed Mar 19, 2003 6:03 am
- Location: Now located in Clay County, NC !
Re: Preamp Chassis
by Blair » Wed Sep 11, 2013 3:12 pm
Hi Ed,
Yes. Beltons to be specific. If you have top mount style, just leave the screws in place and they come up flush. If you have bottom mount style, remove the but and install the tube sockets to flush them.
Thanks,
Blair
Yes. Beltons to be specific. If you have top mount style, just leave the screws in place and they come up flush. If you have bottom mount style, remove the but and install the tube sockets to flush them.
Thanks,
Blair
- Blair
- KT88
- Posts: 1272
- Joined: Thu Nov 09, 2006 10:22 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 10 guests