SOLD! - SE Labs EL35 (6550) Almost All parts and case
Posted: Fri Jan 04, 2013 11:10 amI just dropped the price $50 bucks.
This should be a great deal.
Cmon guys save me from breaking this up on Ebay.
Can't go any cheaper, but this is an exceptional deal.........
Build a Quality JE Labs EL34 (6550 in this case) Single ended amp.
I have been saving parts for over 6 months. No waiting on those Edcor transformers!
Plus no shipping on any of this. This includes the BIG choke and an extra 6.3 v 8A
transformer, as I planned to make separated dc filament run.
Edcor XPWR800-120, 600 v 200 ma power transformer
Edcor GXSE 15-8-5k 15 w 5000 Ohm single ended output transformers: paid
Hammond 193G Reacter 10H 150ma choke
Hammond 167R6 8A 6.3 v heater transformer (planning to make separate dc heaters)
Alps Japan 100k volume pot
Groove Tube 5ar4 rectifier tube
WU Nos 6sl7 driver tubes
Tung Sol 6550 matched pair
2 Sprague Atom 40uf 450v
1 Sprague Atom 20 uf 500v
5 Sprague Atom 100uf 25 v
4 Sprague Atom 100uf 100v
2 Orange Drop Coupling caps
6 Gold RCA connectors
6 ceramic 8 pin tube sockets
Hammond 16x8x3 Aluminum box.
I think I have most of the electrolytics covered.
Schematic as posted by Tom.
http://www.diytube.com/phpBB2/viewtopic.php?f=3&t=5662
The Sprague Atoms were expensive.
I have been following Tom's builds and picked up parts that I know he has used in the past.
Sadly I need the money more than another amp right now.
Price is firm, I just wanted to give you guys first shot before I broke it up and listed it on Ebay.
$300 Include Shipping. (and it will be well packed and heavy)
Paypal only. PM me, first come first served.
Thanks guys, I always like this better than Ebay. You can ask around, I have shipped stuff to
a lot of you, never a complaint and always extra stuff in the box.
This should be a great deal.
Cmon guys save me from breaking this up on Ebay.
Can't go any cheaper, but this is an exceptional deal.........
Build a Quality JE Labs EL34 (6550 in this case) Single ended amp.
I have been saving parts for over 6 months. No waiting on those Edcor transformers!
Plus no shipping on any of this. This includes the BIG choke and an extra 6.3 v 8A
transformer, as I planned to make separated dc filament run.
Edcor XPWR800-120, 600 v 200 ma power transformer
Edcor GXSE 15-8-5k 15 w 5000 Ohm single ended output transformers: paid
Hammond 193G Reacter 10H 150ma choke
Hammond 167R6 8A 6.3 v heater transformer (planning to make separate dc heaters)
Alps Japan 100k volume pot
Groove Tube 5ar4 rectifier tube
WU Nos 6sl7 driver tubes
Tung Sol 6550 matched pair
2 Sprague Atom 40uf 450v
1 Sprague Atom 20 uf 500v
5 Sprague Atom 100uf 25 v
4 Sprague Atom 100uf 100v
2 Orange Drop Coupling caps
6 Gold RCA connectors
6 ceramic 8 pin tube sockets
Hammond 16x8x3 Aluminum box.
I think I have most of the electrolytics covered.
Schematic as posted by Tom.
http://www.diytube.com/phpBB2/viewtopic.php?f=3&t=5662
The Sprague Atoms were expensive.
I have been following Tom's builds and picked up parts that I know he has used in the past.
Sadly I need the money more than another amp right now.
Price is firm, I just wanted to give you guys first shot before I broke it up and listed it on Ebay.
$300 Include Shipping. (and it will be well packed and heavy)
Paypal only. PM me, first come first served.
Thanks guys, I always like this better than Ebay. You can ask around, I have shipped stuff to
a lot of you, never a complaint and always extra stuff in the box.