Page 1 of 1
Baldwin Output Transformers FS
Posted:
Sun Oct 28, 2012 9:09 pmby Blair
I have a pair of these transformers I'm looking to sell due to a rebuild using the rest of these parts. They are in excellent condition with no dents and great original paint. If I recall, they are 3.8K with an 8 ohm speaker tap. Rated at 40W. I have used these for both EL34 and 6550 in triode. The pair in the images are the ones for sale. I will pull them to ship.
Asking $75 shipped for the pair.
Open to reasonable offers as well.
Thanks!
Posted:
Mon Oct 29, 2012 8:19 amby tomlang
Curious as to the mounting hole dimensions, alleged freq response for hifi and confirmation of whether UL taps or not (I assume not), thanks.
8 ohm secondary ONLY, correct?
Posted:
Mon Oct 29, 2012 8:35 amby Blair
Hi Tom,
2.25" X 2.25"
On a calibrated HP339A, I got roughly 30hz-17K +/- 1db.
Correct. No UL taps. That's why I have used them for triode strapped output stages.
Thanks!
Blair
Posted:
Tue Oct 30, 2012 5:42 amby EWBrown
3.8K primary would be a good match for PPP EL84s / 6GK6s, too
/ed B
Posted:
Tue Oct 30, 2012 6:41 pmby Blitzen
Do those have identifying numbers on them? I've heard there are (at least) two different versions of these.
Posted:
Tue Oct 30, 2012 7:04 pmby Blair
Hi,
The numbers are:
F-c512-23668
512-23668A
They both had 7027s driving them, identical laminate stacks and measured the same.
I can pull the primaries and measure the turns ratio again if you want to be certain of the primary impedance.
Thanks!
Blair
Posted:
Tue Oct 30, 2012 7:37 pmby Blitzen
PM sent.
Posted:
Tue Oct 30, 2012 9:14 pmby Blair
Pending sale.
Thanks!