diytube.com

Posted: **Tue Jul 26, 2016 4:35 pm**

I was correcting some info on a Swedish BDSM-forum where I am trying to sell corsets when I ran into pictures of old amplifiers. Suddenly I realized that I have three (propably more)pairs of transformers from China that I happened to buy, just like that.
Right now I have no clues what to do with tem, asking fellows of the Dark Cult of Third Curch of Diy Tube to come with some blasphemic ideas.
The transformers are:
#1 PP UL-taps, 10K Raa, 15W (link that may or may not work)
#2 SE, UL-taps, 5K, 60mA, 8W (link that may or may not work)
#3 SE, UL-taps, 3.5K, 8W, 65mA (link that may or may not work)

I think the transformers are out of stock today and/or the links are only open to me and my account. But the basic data is given.
I have an assortment of small power tubes like ECL82/6, 6V6, 12A6 and some other.

Posted: **Tue Jul 26, 2016 4:56 pm**

What do cows have to do with output trannies (???)

10k cattle output transformer cattle output transformer amplifier transformer 2PCS amplifier Audio HIFI DIY High Quality

Product Detail
The push-pull output cattle Nippon Steel's new 0.35 high permeability silicon steel sheet and high-quality the QA copper production.
Primary impedance 10K, with ultra-linear connection. Secondary 4 ohms, 8 ohms.
Such as push-pull tube amp tube production 6V6 6F6 6Y6 6AQ5 6BQ5 ECL86 6P6P 6P1 6P14 6F3 5687.
Primary impedance 10 k, with UL
Primary resistance - P - P 280 euro
The secondary output 4, 8.
Power 15 w
Frequency response 20-20 k

Compu-translation sometimes gets rather creative (lol)

Posted: **Tue Jul 26, 2016 4:59 pm**

Hopefully they don't sound like what cattle output.

Posted: **Tue Jul 26, 2016 6:07 pm**

Amazing how we latched onto "cattle" and totally missed:

soundbrigade wrote:I was correcting some info on a Swedish BDSM-forum where I am trying to sell corsets.....

Posted: **Tue Jul 26, 2016 9:22 pm**

You missed that!? You ultrareligious and sex-frustated/hating Americanos ..... O:)

What I missed was the 10K of the PP tranny. Guess I have a pair of Edcor 8 or 10K SE för either 10Y or 2C39A, both asking for high impedance load.
2.5k ... 3.5K is perfect for most small wattage tubes, but 5K, could do with GU50, but I'm worried about Ia and P.

Posted: **Wed Jul 27, 2016 8:27 am**

No, he's Canadian (b)

BDSM Been Drinking Some More? (b)

Posted: **Wed Jul 27, 2016 11:31 am**

Yeah, yeah, very funny >:o

What would you do with a 5K, smaller SE-tranny? Two 2A3s in series .... no, that doesn't worke like that.

Posted: **Wed Jul 27, 2016 3:44 pm**

5K SE: EL84, 6V6GT, 2A3, 6B4G, 6BM6 / ECL82 / 6F3P, etc.

the 2A3 / 6B4G may play better with the 3.5K cattle winding interoscitor bovine trangenderiser matching unit