Hi All,
Just finished my Budgie SE amp build which sounded great the first 40 minutes. Then I blew a 1 amp SLO-BLO fuse. Replaced fuse and it instantly blew this time.
No apparent burnt/smoking parts. Don't know if this works-checked all resistors to see if they still had there values on meter-they seemed OK. Any generic tips on trouble shooting would be helpful. All caps appear good and new. I have built several projects in the past- and troubleshooting has always been challenging. Most times my projects don't die like this - if I have a problem it is usually a signal problem -Cliff jack wired wrong or something not grounded and I get noise.
Thanks All