hi guys !
I had an amplly solid state class A single ended mono block.(build from www.diyaudioprojects.com) mark houston.
every each travo at secondary section had +18vdc, +15vdc, +12vdc. the last 2 section volt (+15 vdc & +12vdc) is sitll an avaliable, can i use it to modify for preamp tubeto make this amply to hybrid ?
if i paralel every +15vdc from every each travo and get +30vdc , is that posible to drive any anoda rectivier, or maybe i use +18vdc from 2 travo to paralel to gel +36vdc, is that posible to drive any anoda rectivier tube for preamp tube ?
is that posiblle to modifiy tis amply to hybrid ?
i had a stock of 2c51 Hentz kaufman and 1 dozen 12au7 Jan sylvania,
can it drive from only +vdc /
what diffrent between buffer tube and premp tube ?
i had scema buffer tube 12vdc for use at car .
is that possibbe to modify buffer tube to use PSSR law from John broskie ?
some people said anoda tube must be drive from +90vdc at least to get good sound,is that correft ?
is that any schema preamp tube use +36vdc ?
what different sound from SRPP law and PSRR law ?
maybe some body cam give me any advise !
thank's