Hey everyone,
I posted on the other forum about 100w schematics and a guy that is giving me hell about getting my trannys I bought off ebay. I'm not giving up yet, but I'm not sure there will be much I can do besides show up at his door. We will see what happens though.
Anyway, all of this planted the desire to build a pair of 100 watt monos. I see Tom's point about building a few 30 watt amps and making them sound like 100 watt amps by improvising with the speakers, but I'm not a high efficiency speaker guy. They drive me nuts and then some....Sorry for all the hard core HE speaker/horn guys.
Back to my thoughts and musings because this may not leave my head until a few answers happen. I was referred to the Ikezilla project and that looked very interesting, but I was looking at a different, more cost effective solution. This led me back to Antek again for a quick peak at their trannys. I can buy two 4T400 800vct trannys to get a solid 530v B+, and now they have some nice looking and spec'd OPTs! The AT1008 are rated at 100w and have great looking freq. response. The only issue I can see if they only have an 8 ohm tap and they lack the 40% screen grid. They have 2,022 ohm input impedance though, so I thought they woudl be optimal for a PPP KT88/6550/EL34 amp, but without the 40% screen grid does it not limit you to well under the 100w output? Any suggestions?/Thoughts about these trannys?
http://www.antekinc.com/AT-1008.pdf
http://www.antekinc.com/AN-4T400.pdf
Blair