Hello and Question

the thermionic watercooler

Hello and Question

Postby mad1 » Fri Jun 26, 2015 8:11 am

I joined the forum for the same reason many of you have. Rebuilding a couple of Dynaco ST70s. I have a question that I cannot seem to find an answer too. Is Triode Electronics still open? I have left a couple of messages, e-mailed and placed several calls without leaving messages. All throughout this week. They appeared to have some products I would be interested in specifically their power supply upgrade.

I wanted to make sure they were still a viable resource before I start looking at the other possibilities.

Thanks
Mitch
mad1
 
Posts: 3
Joined: Thu Jun 25, 2015 10:41 am

Re: Hello and Question

Postby Poppa Fuse » Sun Jun 28, 2015 9:00 pm

I am familiar with Triode Electronics, but have never been a customer. I noticed there is a long thread at The Amp Garage by people with the same concerns. http://ampgarage.com/forum/viewtopic.php?t=27342

Nice post by 'dorrisant', "Sent Triode an email: Just thought you guys should read what is being said about your customer service.... Some of the best builders on the planet should have some influence on how you conduct your business. Triode USA reply: thank you for this, we will address these issues"
Last edited by Poppa Fuse on Mon Jun 29, 2015 5:15 pm, edited 1 time in total.
User avatar
Poppa Fuse
 
Posts: 10
Joined: Sun Jun 28, 2015 4:43 pm

Re: Hello and Question

Postby battradio » Mon Jun 29, 2015 5:26 am

click on link and my anti virus won't let you go there
Mark
Image
User avatar
battradio
KT88
 
Posts: 927
Joined: Tue Mar 10, 2009 12:58 am
Location: near ST.Louis MO.

Re: Hello and Question

Postby pmarcin » Mon Jun 29, 2015 7:28 am

Classic Valve Designs (CVD) also offers a board for the ST70. Greg (Geek) , the owner, lurks on this site:

http://www.classicvalve.ca/dynaco.html

FWIW: I would just use a new can cap and individual bias kit from Dynakiparts.
User avatar
pmarcin
 
Posts: 43
Joined: Sat Apr 20, 2013 10:36 am

Re: Hello and Question

Postby Geek » Mon Jun 29, 2015 2:05 pm

Yep, I can help with PSU boards and drivers (so can Shannon and Sheldon here), but not iron or chassis if that's what you need.
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: Hello and Question

Postby nyazzip » Sun Jul 05, 2015 12:25 am

par for course, im afraid.....be patient or shop elsewhere

:|
User avatar
nyazzip
KT88
 
Posts: 1073
Joined: Wed Jan 09, 2008 1:24 am


Return to diy hifi

Who is online

Users browsing this forum: No registered users and 10 guests