diytube.com

I joined the forum for the same reason many of you have. Rebuilding a couple of Dynaco ST70s. I have a question that I cannot seem to find an answer too. Is Triode Electronics still open? I have left a couple of messages, e-mailed and placed several calls without leaving messages. All throughout this week. They appeared to have some products I would be interested in specifically their power supply upgrade.

I wanted to make sure they were still a viable resource before I start looking at the other possibilities.

Thanks
Mitch

I am familiar with Triode Electronics, but have never been a customer. I noticed there is a long thread at The Amp Garage by people with the same concerns. http://ampgarage.com/forum/viewtopic.php?t=27342

Nice post by 'dorrisant', "Sent Triode an email: Just thought you guys should read what is being said about your customer service.... Some of the best builders on the planet should have some influence on how you conduct your business. Triode USA reply: thank you for this, we will address these issues"

click on link and my anti virus won't let you go there

Classic Valve Designs (CVD) also offers a board for the ST70. Greg (Geek) , the owner, lurks on this site:

http://www.classicvalve.ca/dynaco.html

FWIW: I would just use a new can cap and individual bias kit from Dynakiparts.

Yep, I can help with PSU boards and drivers (so can Shannon and Sheldon here), but not iron or chassis if that's what you need.

par for course, im afraid.....be patient or shop elsewhere