Anyone planning to go to Rocky Mountain Audio Fest (http://audiofest.net/new/) this year? I think Thermion & I will drive out for it. Would love to meet up with anyone. If you've been before, I'd love to hear anything you've got to say about it.
Same goes for the Dayton Hamvention 2014 (http://www.hamvention.org/). I've meant to go for years, but finally plan to go on the Friday or Saturday sessions. I know Ed Long was a regular for years.
Shannon
Events: RMAF 2014 & Hamvention 2014
9 posts
• Page 1 of 1
Events: RMAF 2014 & Hamvention 2014
by Shannon Parks » Wed Mar 26, 2014 9:08 am
- designer of fine tube audio gear at (((parks audio)))
- founder and admin of the diytube forums
-
Shannon Parks - Site Admin
- Posts: 3764
- Joined: Tue Mar 18, 2003 5:40 pm
- Location: Poulsbo, Washington
Re: Events: RMAF 2014 & Hamvention 2014
by Geek » Wed Mar 26, 2014 12:07 pm
Would have loved to go to the hamvention. Been too long since I played with vacuum variable caps 
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
-
Geek - KT88
- Posts: 3585
- Joined: Sun Oct 21, 2007 3:01 am
- Location: Chilliwack, British Columbia
Re: Events: RMAF 2014 & Hamvention 2014
by WA4SWJ » Wed Mar 26, 2014 4:03 pm
Shannon,
I'm still a regular and I'm going again this year. This will be year #40 for me. I started going in 1974 when I worked for Ford Motor Co.
I'll be at FDIM (QRP ARCI club) meeting on Thursday at the Holiday Inn in Fairborn and then the Hamvention the rest of the weekend. Can't wait to get there!
Would love to go to the Rocky Mountain Audio Fest, but right now I don't have plans for that.
Ed
WA4SWJ
I'm still a regular and I'm going again this year. This will be year #40 for me. I started going in 1974 when I worked for Ford Motor Co.
I'll be at FDIM (QRP ARCI club) meeting on Thursday at the Holiday Inn in Fairborn and then the Hamvention the rest of the weekend. Can't wait to get there!
Would love to go to the Rocky Mountain Audio Fest, but right now I don't have plans for that.
Ed
WA4SWJ
Ed Long
-
WA4SWJ - KT88
- Posts: 650
- Joined: Mon Dec 27, 2004 8:39 pm
- Location: Belleview, FL
Re: Events: RMAF 2014 & Hamvention 2014
by Shannon Parks » Wed Mar 26, 2014 4:21 pm
WA4SWJ wrote:I'm still a regular and I'm going again this year. This will be year #40 for me. I started going in 1974 when I worked for Ford Motor Co.
I'll be at FDIM (QRP ARCI club) meeting on Thursday at the Holiday Inn in Fairborn and then the Hamvention the rest of the weekend. Can't wait to get there!
Cool, Ed! Definitely will want to meet up with you. Maybe we can have breakfast on Saturday morning?
Shannon
- designer of fine tube audio gear at (((parks audio)))
- founder and admin of the diytube forums
-
Shannon Parks - Site Admin
- Posts: 3764
- Joined: Tue Mar 18, 2003 5:40 pm
- Location: Poulsbo, Washington
Re: Events: RMAF 2014 & Hamvention 2014
by WA4SWJ » Wed Mar 26, 2014 5:04 pm
Sounds good to me. We can work the details a little later on.
Ed Long
-
WA4SWJ - KT88
- Posts: 650
- Joined: Mon Dec 27, 2004 8:39 pm
- Location: Belleview, FL
Re: Events: RMAF 2014 & Hamvention 2014
by WA4SWJ » Mon May 12, 2014 7:15 am
Shannon,
Heading to Dayton on Wednesday of this week for the FDIM meeting on Thursday put on by QRP ARCI (QRP - low power: ARCI - Amateur Radio Club International). Then Hamvention on Friday and Saturday. Will be staying in Fairborn east of Dayton at the hotel where the QRP ARCI meeting is held.
I'll send a PM with my cell phone number.
See you there.
Heading to Dayton on Wednesday of this week for the FDIM meeting on Thursday put on by QRP ARCI (QRP - low power: ARCI - Amateur Radio Club International). Then Hamvention on Friday and Saturday. Will be staying in Fairborn east of Dayton at the hotel where the QRP ARCI meeting is held.
I'll send a PM with my cell phone number.
See you there.
Ed Long
-
WA4SWJ - KT88
- Posts: 650
- Joined: Mon Dec 27, 2004 8:39 pm
- Location: Belleview, FL
Re: Events: RMAF 2014 & Hamvention 2014
by Shannon Parks » Tue May 13, 2014 5:48 am
Will do, Ed! Hopefully you are an early riser so we can grab some breakfast early Saturday before I go plunder. 
Shannon
Shannon
- designer of fine tube audio gear at (((parks audio)))
- founder and admin of the diytube forums
-
Shannon Parks - Site Admin
- Posts: 3764
- Joined: Tue Mar 18, 2003 5:40 pm
- Location: Poulsbo, Washington
Re: Events: RMAF 2014 & Hamvention 2014
by WA4SWJ » Tue May 13, 2014 5:54 am
Yep - early riser. I got your message and will text you when there. If not for breakfast we could meet in the arena when it's time to take a break from all the walking around.
Ed Long
-
WA4SWJ - KT88
- Posts: 650
- Joined: Mon Dec 27, 2004 8:39 pm
- Location: Belleview, FL
Re: Events: RMAF 2014 & Hamvention 2014
by Shannon Parks » Tue May 13, 2014 5:56 am
Sounds good, Ed! Been meaning to go for *years* now.
Shannon
Shannon
- designer of fine tube audio gear at (((parks audio)))
- founder and admin of the diytube forums
-
Shannon Parks - Site Admin
- Posts: 3764
- Joined: Tue Mar 18, 2003 5:40 pm
- Location: Poulsbo, Washington
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 42 guests