Thanks for getting me in the forum. I just have a quick question on the parts list that you revised, just need to make sure what value to use. Below you mentioned on your post about R1 & R2 to sub from 271-210-RC to 271-215-RC - with that are you changing the resistor value and recommend using 215 Ohm instead of 210 Ohm? Another one is the VR4, should I change the value from 10K to 5K (FROM 72-T93YB-10K to 72-T93YB-5K)? Thanks!!!
1) Sub these from Mouser:
- Code: Select all
C5,C6,C8 47uF 35V, 5D 2LS 647-UVZ1V470MDD 0.17
R1,R2 210, 1/4W 271-210-RC 0.13
VR4 10K Pot 72-T93YB-10K 1.58
647-UVZ1H470MED qty 3
271-215-RC qty 2
72-T93YB-5K qty 1