Page 1 of 1
budgie S/W
Posted:
Sat Aug 09, 2014 3:04 pmby audioray
what wire goes to power s/w center lug i cant tell. i have 2 black wire left.
Re: budgie S/W
Posted:
Sun Aug 10, 2014 6:30 pmby audioray
well i got power to s/w a nice green. but have no power to the tubes. looking at pictures on web site i have the same.my best friend is a elec. tech.
i need his help. i have not check my voltage yet. any idea would be welcome
thank you. 617 491 5755
Re: budgie S/W
Posted:
Mon Aug 11, 2014 6:55 amby Shannon Parks
Ray, reference page three of the schematic:
1) You should have your LINE from the the AC (black) go to a fuse, then to pin 1 on the switch.
2) Pin 2 goes to one of the black wires on your power transformer.
3) Your NEUTRAL (white) and the other unused black wire from your power transformer get tied together. They can be crimped together with a quick connect and then plugged onto pin 3 of your ON/OFF switch.
So pin 3 ends up being two things: the NEUTRAL connection to the power transformer as well as the (minuscule) power for the neon light.
Shannon
Re: budgie S/W
Posted:
Mon Aug 11, 2014 1:54 pmby audioray
yaeeeeee. it worked now tubes burning in.could not see in the photowire now to hook up led meters.