I actually have the boards, but I probably need another week to finalize things (BOM and stuff). I'll order top plates at that time, but you needn't wait if you don't want one. The top plates will be gloss black with gold stenciling like my commercial Budgie. This one was a green PCB that I spray painted black along with the Edcor bells. It was tough cramming everything in there, but was doable. Unhappy with a couple items that are fixable (hate the Neutrik headphone jack - switching to an 1/8" jack). But overall, I think it's a contender. I'll have to post some "under the hood" shots later.
Here's a peek at the schematic, but I see a couple small things I haven't fixed yet (went to a 22uF final stage cap, 100k pot, heaters lift to the EL84 cathode voltage, and a couple other things):
http://www.diytube.com/forumpix/budgiese.pdf
It's kind of a Clem ULtra with AC-coupled inputs, headphone jack with my 20/20 scheme and volume pot standard. A perfect amp for the shop, work or school with 3W output from 500mV source, like a smartphone.
Shannon