Page 1 of 1

Edcor Push-pull output transformer.

PostPosted: Fri Dec 15, 2017 6:05 pm
by IGGY
3995 one.JPG
3995 one.JPG (108.23 KiB) Viewed 6379 times
Hello All,
Before place list on prebay I will give you guys head up.

I built Eiclone KT120... Dual Mono x 2 on Nov. 2013 and still work good and sound great. I will start new line arrays speaker project and speakers impedance will be 3.2 ohm (planar tweeter) and 6 ohm midbass. I ordered new custom output transformer from Edcor to matched speakers impedance and will be receive them around end of Feb. 2018.
I will sell two pair of push-pull output transformer Edcor CXPP100-MS-4.2K
100 watts
primary 4200 ohm
secondary 4,8 and 16 ohm
screen voltage 42%
Transformers still work great and look like new. Please check out prebay on/or end of Feb.2018.

Thanks,
Iggy
If you are interest now. You can mail and we go from there.
My e-mail address is: AKGAPONG@AOL.COM

Re: Edcor Push-pull output transformer.

PostPosted: Fri Dec 15, 2017 7:15 pm
by IGGY
my2.JPG
my2.JPG (203.86 KiB) Viewed 6373 times

Re: Edcor Push-pull output transformer.

PostPosted: Fri Dec 15, 2017 9:39 pm
by Geek
DANG! That is as Cannonball Adderley might say, saxy (love)

Re: Edcor Push-pull output transformer.

PostPosted: Fri Dec 15, 2017 10:00 pm
by IGGY
Got you ! Geek (lol)