Edcor Push-pull output transformer.

a DIY, modified Mullard 5-20 monoblock design

Edcor Push-pull output transformer.

Postby IGGY » Fri Dec 15, 2017 6:05 pm

3995 one.JPG
3995 one.JPG (108.23 KiB) Viewed 904 times
Hello All,
Before place list on prebay I will give you guys head up.

I built Eiclone KT120... Dual Mono x 2 on Nov. 2013 and still work good and sound great. I will start new line arrays speaker project and speakers impedance will be 3.2 ohm (planar tweeter) and 6 ohm midbass. I ordered new custom output transformer from Edcor to matched speakers impedance and will be receive them around end of Feb. 2018.
I will sell two pair of push-pull output transformer Edcor CXPP100-MS-4.2K
100 watts
primary 4200 ohm
secondary 4,8 and 16 ohm
screen voltage 42%
Transformers still work great and look like new. Please check out prebay on/or end of Feb.2018.

Thanks,
Iggy
If you are interest now. You can mail and we go from there.
My e-mail address is: AKGAPONG@AOL.COM
Last edited by IGGY on Fri Dec 15, 2017 7:17 pm, edited 1 time in total.
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm

Re: Edcor Push-pull output transformer.

Postby IGGY » Fri Dec 15, 2017 7:15 pm

my2.JPG
my2.JPG (203.86 KiB) Viewed 898 times
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm

Re: Edcor Push-pull output transformer.

Postby Geek » Fri Dec 15, 2017 9:39 pm

DANG! That is as Cannonball Adderley might say, saxy (love)
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: Edcor Push-pull output transformer.

Postby IGGY » Fri Dec 15, 2017 10:00 pm

Got you ! Geek (lol)
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm


Return to eiclone

Who is online

Users browsing this forum: No registered users and 1 guest

cron