Page 1 of 1

IKE monster build plan

PostPosted: Fri Jul 03, 2015 7:20 pm
by justinsweber
Guys,

Im wanting to mimick the built plan of the 100W IKEs. From what Ive read it was intially spec'd with 900CT PT, KT120s and yielded 92watts.
What do we need to do to get up to 100watts 950CT 340MA, 6.3 @ 7A? 4.2K primaries?
KT150s are 2a each to light up. 2ax2tubes+300ma for 6SL7+150ma for 12AX7=4.45A needed. (min 6.75A needed?)
The Manual states the 100W build cant use a choke... Many have... 2H @ 300ma.
What power supply caps were used? Were they spec'd at 450v or did everyone step them up? Same for coupling?

Long story short...lets put hour head together and build a monster. (I can get transformers wound for a test run.)

Re: IKE monster build plan

PostPosted: Fri Dec 25, 2015 4:13 pm
by IGGY
3995 one.JPG
3995 one.JPG (108.23 KiB) Viewed 4319 times
3995 one.JPG
3995 one.JPG (108.23 KiB) Viewed 4319 times
;) You mean like my KT120 (banana) (banana)

Re: IKE monster build plan

PostPosted: Fri Dec 25, 2015 4:18 pm
by IGGY
my2.JPG
my2.JPG (203.86 KiB) Viewed 4317 times