IKE monster build plan

a DIY, modified Mullard 5-20 monoblock design

IKE monster build plan

Postby justinsweber » Fri Jul 03, 2015 7:20 pm

Guys,

Im wanting to mimick the built plan of the 100W IKEs. From what Ive read it was intially spec'd with 900CT PT, KT120s and yielded 92watts.
What do we need to do to get up to 100watts 950CT 340MA, 6.3 @ 7A? 4.2K primaries?
KT150s are 2a each to light up. 2ax2tubes+300ma for 6SL7+150ma for 12AX7=4.45A needed. (min 6.75A needed?)
The Manual states the 100W build cant use a choke... Many have... 2H @ 300ma.
What power supply caps were used? Were they spec'd at 450v or did everyone step them up? Same for coupling?

Long story short...lets put hour head together and build a monster. (I can get transformers wound for a test run.)
justinsweber
 
Posts: 188
Joined: Sat Sep 20, 2008 7:16 pm
Location: Long Beach, CA

Re: IKE monster build plan

Postby IGGY » Fri Dec 25, 2015 4:13 pm

3995 one.JPG
3995 one.JPG (108.23 KiB) Viewed 9180 times
3995 one.JPG
3995 one.JPG (108.23 KiB) Viewed 9180 times
;) You mean like my KT120 (banana) (banana)
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm

Re: IKE monster build plan

Postby IGGY » Fri Dec 25, 2015 4:18 pm

my2.JPG
my2.JPG (203.86 KiB) Viewed 9178 times
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm


Return to eiclone

Who is online

Users browsing this forum: No registered users and 11 guests