Page 1 of 1

I have a question .

PostPosted: Sun Oct 19, 2014 4:17 pm
by IGGY
Hello There ;)

I have a question . (???)
I like to drive the 3 ohm speakers (tweeters) on the eiclone 4 ohm tap . Is will be ok to do that?

Regards,
Iggy

Re: I have a question .

PostPosted: Mon Oct 20, 2014 5:22 am
by Shannon Parks
IGGY wrote:Hello There ;)

I have a question . (???)
I like to drive the 3 ohm speakers (tweeters) on the eiclone 4 ohm tap . Is will be ok to do that?

Regards,
Iggy


Are you bi-amping or building a set of DIY speakers, Iggy? Could you point to a model number or datasheet?

Shannon

Re: I have a question .

PostPosted: Mon Oct 20, 2014 5:03 pm
by IGGY
Hello Shannon ;)

Thanks !
Yes! right now the system is bi-amps. and eiclone is drive my DIY line arrays with DSP 2496 sound great, but diy is diy I'm keep going none stop.
I just want to add 4 ribbon tweeter (two each l-r) as super tweeter and the imp. will go down to about 3.2 ohm.

Best Regards,
Iggy

Re: I have a question .

PostPosted: Wed Oct 22, 2014 8:08 am
by Shannon Parks
IGGY wrote:Hello Shannon ;)

Thanks !
Yes! right now the system is bi-amps. and eiclone is drive my DIY line arrays with DSP 2496 sound great, but diy is diy I'm keep going none stop.
I just want to add 4 ribbon tweeter (two each l-r) as super tweeter and the imp. will go down to about 3.2 ohm.

Best Regards,
Iggy


Shouldn't be a problem, Iggy.

Shannon

Re: I have a question .

PostPosted: Wed Oct 22, 2014 4:25 pm
by IGGY
Thanks ;) Shannon. I will start project soon.

Best Regards,
Iggy