I have a question .

a DIY, modified Mullard 5-20 monoblock design

I have a question .

Postby IGGY » Sun Oct 19, 2014 4:17 pm

Hello There ;)

I have a question . (???)
I like to drive the 3 ohm speakers (tweeters) on the eiclone 4 ohm tap . Is will be ok to do that?

Regards,
Iggy
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: I have a question .

Postby Shannon Parks » Mon Oct 20, 2014 5:22 am

IGGY wrote:Hello There ;)

I have a question . (???)
I like to drive the 3 ohm speakers (tweeters) on the eiclone 4 ohm tap . Is will be ok to do that?

Regards,
Iggy


Are you bi-amping or building a set of DIY speakers, Iggy? Could you point to a model number or datasheet?

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3762
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: I have a question .

Postby IGGY » Mon Oct 20, 2014 5:03 pm

Hello Shannon ;)

Thanks !
Yes! right now the system is bi-amps. and eiclone is drive my DIY line arrays with DSP 2496 sound great, but diy is diy I'm keep going none stop.
I just want to add 4 ribbon tweeter (two each l-r) as super tweeter and the imp. will go down to about 3.2 ohm.

Best Regards,
Iggy
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: I have a question .

Postby Shannon Parks » Wed Oct 22, 2014 8:08 am

IGGY wrote:Hello Shannon ;)

Thanks !
Yes! right now the system is bi-amps. and eiclone is drive my DIY line arrays with DSP 2496 sound great, but diy is diy I'm keep going none stop.
I just want to add 4 ribbon tweeter (two each l-r) as super tweeter and the imp. will go down to about 3.2 ohm.

Best Regards,
Iggy


Shouldn't be a problem, Iggy.

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3762
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: I have a question .

Postby IGGY » Wed Oct 22, 2014 4:25 pm

Thanks ;) Shannon. I will start project soon.

Best Regards,
Iggy
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm


Return to eiclone

Who is online

Users browsing this forum: No registered users and 1 guest