Page 1 of 2
KT150 from Tung-Sol ?
Posted:
Thu Dec 19, 2013 6:10 pm
by IGGY
Happy New Year To All
Shannon
The Eiclone KT120 is sound Z00000 good. I'm like to try out KT150
.
If I plug in KT150 instead of KT120 . What do you think?
Regards,
Iggy
Re: KT150 from Tung-Sol ?
Posted:
Thu Dec 19, 2013 6:31 pm
by EWBrown
Just make sure that the 6.3 V filament supply has sufficient current capability, before using the KT150s.
/ed B
Re: KT150 from Tung-Sol ?
Posted:
Thu Dec 19, 2013 6:48 pm
by IGGY
Thanks !
I will looking to that matter.
Regards,
Iggy
Re: KT150 from Tung-Sol ?
Posted:
Sat Dec 21, 2013 6:27 am
by Shannon Parks
And make sure your bias is cranked all the way. You may run out of bias supply - I think you can hit -90V or so.
Shannon
Re: KT150 from Tung-Sol ?
Posted:
Sat Dec 21, 2013 5:12 pm
by IGGY
Thanks Shannon
If filament draw at max. Total current for two KT150 + one 6SL7 + one 6SN7 is about 4.9 amps. The Edcor filament is 5 amps
Best Regard,
Iggy
Re: KT150 from Tung-Sol ?
Posted:
Sun Dec 22, 2013 6:00 am
by hilldweller
How are those KT-150's working out?
Re: KT150 from Tung-Sol ?
Posted:
Sun Dec 22, 2013 7:04 am
by IGGY
Hello There,
Just only my thought for now.
Are you still waiting from Edcor?
Best Regards,
Iggy
Re: KT150 from Tung-Sol ?
Posted:
Sun Dec 22, 2013 7:41 am
by hilldweller
Yes, they have not shipped yet. How long did it take to get yours? Still waiting on some backordered parts from mouser as well.
I found a local source for chassis metal as well.
http://www.shapirosupply.com/index.php
Re: KT150 from Tung-Sol ?
Posted:
Sun Dec 22, 2013 8:50 am
by IGGY
Them said 6 weeks, but I got my in four weeks (I ordered eight at the same time).
Thanks ! for the web. great.
Please keep us update.
Happy New Year,
Iggy
Re: KT150 from Tung-Sol ?
Posted:
Mon Dec 23, 2013 6:45 pm
by EWBrown
EDCOR closes down for a week or two around the Christmas - New Years holiday / vacation time, that would delay the shipping.
/ed B
Re: KT150 from Tung-Sol ?
Posted:
Mon Dec 23, 2013 7:00 pm
by hilldweller
EWBrown wrote:EDCOR closes down for a week or two around the Christmas - New Years holiday / vacation time, that would delay the shipping.
/ed B
Thanks for the heads up on that!
Re: KT150 from Tung-Sol ?
Posted:
Tue Jan 14, 2014 6:21 pm
by hilldweller
IGGY wrote:;) Hello There,
Just only my thought for now.
Are you still waiting from Edcor?
Best Regards,
Iggy
I think I will use the KT-150's,
I had Edcor make some appropriate transformers for me, 120 vac primary and 900 vac center tapped (450-0-450) @ 300ma, 6.3 vac @ 6amps. This should be a little more than sufficient to run these tubes. The tubes will not be directly connected to the pc boards for obvious reasons.
Re: KT150 from Tung-Sol ?
Posted:
Tue Jun 10, 2014 1:02 pm
by Marshman
hilldweller,
Do you have a part number for that transformer? I think I would like to try a build with the 150's.
Thanks,
Marshall
Re: KT150 from Tung-Sol ?
Posted:
Tue Jun 10, 2014 4:30 pm
by hilldweller
Marshman wrote:hilldweller,
Do you have a part number for that transformer? I think I would like to try a build with the 150's.
Thanks,
Marshall
Edcor part # is XPWR263-120
Re: KT150 from Tung-Sol ?
Posted:
Wed Jun 11, 2014 5:06 am
by Marshman
Thank you!
Apparently they do not have that on their site yet. I will inquire about it.
Marshall
PS. How are those transformers and tubes working out?