Oops !

a DIY, modified Mullard 5-20 monoblock design

Oops !

Postby IGGY » Sun Oct 13, 2013 6:23 pm

More pic (zzz)
Attachments
my2.JPG
my2.JPG (203.86 KiB) Viewed 3658 times
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: Oops !

Postby Shannon Parks » Mon Oct 14, 2013 10:39 am

What's the total weight there, Iggy? It's a two man load, I think. ;)

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3762
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: Oops !

Postby IGGY » Mon Oct 14, 2013 5:13 pm

Hello Shannon :'(

Roughly 62 lbs Shannon ! I need to reinforce the shelves and hope I will finish them in week or two.

Best Regards,
Iggy
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: Oops !

Postby hilldweller » Wed Dec 11, 2013 8:22 pm

Do you got wheely bars on the back of that ? Looks kinda back heavy. :)) But I love it! Awesome job. (y)
How did you get your chassis ? I want to make my own chassis but I am a little apprehensive about doing so. I only have a Bosch Jig Saw and an industrial drill press to work with. Hole saws and drill bits. No CNC or Laser machine access. :(
Analog is Real! Experience it!
Digital leads to trans humanism. Not good.
User avatar
hilldweller
KT88
 
Posts: 285
Joined: Wed Aug 01, 2007 5:28 pm
Location: St. Louis Missouri USA

Re: Oops !

Postby IGGY » Thu Dec 12, 2013 5:35 pm

Hello There ;)

Yes! :'( very heavy. THANKS !
The chassis I got from ebay and ask them to drill the back plate hole for rca ect. and the front sq. for bias metering.
Top plate I did myself =:o same here....hole saw, drill press and drill bits.

Regards,
Iggy
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: Oops !

Postby hilldweller » Thu Dec 12, 2013 5:48 pm

Great! Thank you so much. Will be starting project soon, waiting on transformers. ;)
Analog is Real! Experience it!
Digital leads to trans humanism. Not good.
User avatar
hilldweller
KT88
 
Posts: 285
Joined: Wed Aug 01, 2007 5:28 pm
Location: St. Louis Missouri USA

Re: Oops !

Postby IGGY » Thu Dec 12, 2013 7:17 pm

What transformer you will be use for the project? I love EDCOR for sure ;)

Iggy
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: Oops !

Postby hilldweller » Thu Dec 12, 2013 7:43 pm

Edcor outputs # CXPP100-MS-4.2K and for the power transformer, one for each channel with covers, and for the chokes, Edcor #XC87-2H-300mA .

Plenty of reserve power in case I want to try Tung-Sol KT-150.
http://www.thetubestore.com/Tubes/KT88- ... -Sol-KT150

Plate dissipation is 70 watts per tube. (b)
Analog is Real! Experience it!
Digital leads to trans humanism. Not good.
User avatar
hilldweller
KT88
 
Posts: 285
Joined: Wed Aug 01, 2007 5:28 pm
Location: St. Louis Missouri USA


Return to eiclone

Who is online

Users browsing this forum: No registered users and 1 guest