Page 1 of 1

Please!!! Help !!! Eiclone R29 valve ?

PostPosted: Thu Jan 31, 2013 8:07 pm
by IGGY
Hi All !

Happy New Year to all ;)
I just about start new eiclone project and want to make sure everything go to right direction.
If my plate voltage is 500 volts.......my R29 will be 4.5 kohm (rev.B). Is the R29 valve is right?
I can't wait to show my custom chassis. Please stay tune.

Regards,
Iggy (n)

Re: Please!!! Help !!! Eiclone R29 valve ?

PostPosted: Sun Feb 03, 2013 11:24 am
by Shannon Parks
Yes, Iggy - that value (or whatever is in the ballpark for a standard resistor) is correct. Looking forward to seeing your new chassis!

Shannon

Re: Please!!! Help !!! Eiclone R29 valve ?

PostPosted: Sun Feb 03, 2013 12:32 pm
by IGGY
Hello Shannon ;)

Thanks! I will post here asap the project is finish. The chassis is design for dual mono and will have the digital dc meter for bias read out on the front plate. I still like to try KT120 with 1650R opt and 278X for power transformer (two power transformer for dual mono).

The Edcor CXPP100-MS-4.2K 100W OPT. is very interest for the project ($92 VS $145 1650R), but I concern about wiring. Hope someone can help me on this opt. :'(

Regards,
Iggy

Re: Please!!! Help !!! Eiclone R29 valve ?

PostPosted: Mon Feb 04, 2013 6:48 am
by Shannon Parks
IGGY wrote:The Edcor CXPP100-MS-4.2K 100W OPT. is very interest for the project ($92 VS $145 1650R), but I concern about wiring. Hope someone can help me on this opt. :'(


As soon as I finish my 300B amp (with monster Edcor SE outputs), I plan to switch gears to some Edcor Ikes with the 100Watters.

Shannon

Re: Please!!! Help !!! Eiclone R29 valve ?

PostPosted: Mon Feb 04, 2013 5:31 pm
by IGGY
Thanks! Shannon.

I will wait for your project. Please let me know.

Regards,

Iggy

Re: Please!!! Help !!! Eiclone R29 valve ?

PostPosted: Mon Nov 25, 2013 5:33 pm
by hilldweller
IGGY wrote:Hello Shannon ;)

Thanks! I will post here asap the project is finish. The chassis is design for dual mono and will have the digital dc meter for bias read out on the front plate. I still like to try KT120 with 1650R opt and 278X for power transformer (two power transformer for dual mono).

The Edcor CXPP100-MS-4.2K 100W OPT. is very interest for the project ($92 VS $145 1650R), but I concern about wiring. Hope someone can help me on this opt. :'(

Regards,
Iggy

Are these the output transformers that you used?

I want to find toroidal transformers for the power trans.

Re: Please!!! Help !!! Eiclone R29 valve ?

PostPosted: Mon Nov 25, 2013 5:51 pm
by IGGY
Yes !

I mail out information today.

Cheers,
Iggy ;)