Please!!! Help !!! Eiclone R29 valve ?

a DIY, modified Mullard 5-20 monoblock design

Please!!! Help !!! Eiclone R29 valve ?

Postby IGGY » Thu Jan 31, 2013 8:07 pm

Hi All !

Happy New Year to all ;)
I just about start new eiclone project and want to make sure everything go to right direction.
If my plate voltage is 500 volts.......my R29 will be 4.5 kohm (rev.B). Is the R29 valve is right?
I can't wait to show my custom chassis. Please stay tune.

Regards,
Iggy (n)
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: Please!!! Help !!! Eiclone R29 valve ?

Postby Shannon Parks » Sun Feb 03, 2013 11:24 am

Yes, Iggy - that value (or whatever is in the ballpark for a standard resistor) is correct. Looking forward to seeing your new chassis!

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3762
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: Please!!! Help !!! Eiclone R29 valve ?

Postby IGGY » Sun Feb 03, 2013 12:32 pm

Hello Shannon ;)

Thanks! I will post here asap the project is finish. The chassis is design for dual mono and will have the digital dc meter for bias read out on the front plate. I still like to try KT120 with 1650R opt and 278X for power transformer (two power transformer for dual mono).

The Edcor CXPP100-MS-4.2K 100W OPT. is very interest for the project ($92 VS $145 1650R), but I concern about wiring. Hope someone can help me on this opt. :'(

Regards,
Iggy
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: Please!!! Help !!! Eiclone R29 valve ?

Postby Shannon Parks » Mon Feb 04, 2013 6:48 am

IGGY wrote:The Edcor CXPP100-MS-4.2K 100W OPT. is very interest for the project ($92 VS $145 1650R), but I concern about wiring. Hope someone can help me on this opt. :'(


As soon as I finish my 300B amp (with monster Edcor SE outputs), I plan to switch gears to some Edcor Ikes with the 100Watters.

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3762
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: Please!!! Help !!! Eiclone R29 valve ?

Postby IGGY » Mon Feb 04, 2013 5:31 pm

Thanks! Shannon.

I will wait for your project. Please let me know.

Regards,

Iggy
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm

Re: Please!!! Help !!! Eiclone R29 valve ?

Postby hilldweller » Mon Nov 25, 2013 5:33 pm

IGGY wrote:Hello Shannon ;)

Thanks! I will post here asap the project is finish. The chassis is design for dual mono and will have the digital dc meter for bias read out on the front plate. I still like to try KT120 with 1650R opt and 278X for power transformer (two power transformer for dual mono).

The Edcor CXPP100-MS-4.2K 100W OPT. is very interest for the project ($92 VS $145 1650R), but I concern about wiring. Hope someone can help me on this opt. :'(

Regards,
Iggy

Are these the output transformers that you used?

I want to find toroidal transformers for the power trans.
Analog is Real! Experience it!
Digital leads to trans humanism. Not good.
User avatar
hilldweller
KT88
 
Posts: 285
Joined: Wed Aug 01, 2007 5:28 pm
Location: St. Louis Missouri USA

Re: Please!!! Help !!! Eiclone R29 valve ?

Postby IGGY » Mon Nov 25, 2013 5:51 pm

Yes !

I mail out information today.

Cheers,
Iggy ;)
User avatar
IGGY
 
Posts: 80
Joined: Wed Nov 21, 2007 6:22 pm


Return to eiclone

Who is online

Users browsing this forum: No registered users and 1 guest