The eiclone will be fixed bias. Thanks ! for information about the transformer.
Regards, Iggy
Re: 1650R ????
Posted: Sun Dec 23, 2012 1:18 pm
by Shannon Parks
I think that will work fine with a KT120, Iggy.
Shannon
Re: 1650R ????
Posted: Sun Dec 23, 2012 3:22 pm
by IGGY
Thanks ! Shannon,
I received the Ike pcb...thanks again. You said.... you getting around 80 watts with heavily bias KT88 on the stock Ike. I like to try KT120 with 1650R (100 w. opt). I'm concern about 1650R wring. Can I use the same stock (1650N) wring diagram ? Any parts valve need to be worry about?