Page 1 of 1

1650R ????

PostPosted: Sat Dec 22, 2012 8:05 pm
by IGGY
Can I use 1650R in the eiclone instead 1650N? Any stock part need to be change? I plan to use KT120 for new eiclone project.

Regards to all,
Iggy :/

Re: 1650R ????

PostPosted: Sat Dec 22, 2012 10:51 pm
by battradio
Well you will need a lot more bias , Are you going to cathode bias or fix bias ,I would use the Edcor CXPP100-MS-4.2K http://www.edcorusa.com/p/458/cxpp100-ms-4_2k

Re: 1650R ????

PostPosted: Sun Dec 23, 2012 8:07 am
by IGGY
Thanks ! [:)

The eiclone will be fixed bias. Thanks ! for information about the transformer.

Regards,
Iggy

Re: 1650R ????

PostPosted: Sun Dec 23, 2012 1:18 pm
by Shannon Parks
I think that will work fine with a KT120, Iggy.

Shannon

Re: 1650R ????

PostPosted: Sun Dec 23, 2012 3:22 pm
by IGGY
;) Thanks ! Shannon,

I received the Ike pcb...thanks again. You said.... you getting around 80 watts with heavily bias KT88 on the stock Ike. I like to try KT120 with 1650R (100 w. opt).
I'm concern about 1650R wring. Can I use the same stock (1650N) wring diagram ? Any parts valve need to be worry about?

Best Regards,
Iggy